How to control a controlled switch
5 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Titouan raffray
el 25 de Mayo de 2020
Respondida: Joel Van Sickel
el 26 de Mayo de 2020
Hello everyone,
I'm coming to you to find out if there is a technique for ordering a switch. Here is the electrical diagram that I would like to make on Simulink.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/300103/image.png)
I would like the switch K to form when the voltage Vp is at its maximum.
Thanks for your advices,
Have a good day
0 comentarios
Respuesta aceptada
Joel Van Sickel
el 26 de Mayo de 2020
Hello Titouan,
First, here are some links of training and examples that are useful:
If you need more info on simscape basics, look here: https://www.youtube.com/watch?v=fsTHCRtUNCA&t=1621s
And see this example: https://www.mathworks.com/help/physmod/simscape/examples/full-wave-bridge-rectifier.html
and see this example: https://www.mathworks.com/help/physmod/simscape/examples/operating-point-rlc-transient-response.html
Here is how to set up your circuit:
You can use this block to be switch K: https://www.mathworks.com/help/physmod/simscape/ref/switch.html
You will need to use a voltage sensor block to measure Vp: https://www.mathworks.com/help/physmod/simscape/ref/voltagesensor.html
if you use a converter block to bring this signal into simulink, and use an comparison logic to determine when your switch should turn on or off: https://www.mathworks.com/help/physmod/simscape/ref/pssimulinkconverter.html. You should add a simulink transfer function with a numerator of [1], and a denominator of [Ts 1] and pick a TS to create a low pass filter on your voltage input. Maybe start with 1000.
Then, make sure the simulink signal is larger than the switch threshold voltage, bring it back into simulink and use it to control that switch: https://www.mathworks.com/help/physmod/simscape/ref/simulinkpsconverter.html
Regards,
Joel
0 comentarios
Más respuestas (0)
Comunidades de usuarios
Más respuestas en Power Electronics Control
Ver también
Categorías
Más información sobre Switches and Breakers en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!