How To Move OFDM Signal From BaseBand
5 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
hi everybody
if anyone knows how to move this signal (bw=20MHz)
and to move it from 0-20MHz to 1920MHz-1940MHz
any help will be appreciated !
Here is the code :
clear all
nFFTSize =64 ;
% for each symbol bits a1 to a52 are assigned to subcarrier
% index [-26 to -1 1 to 26]
subcarrierIndex = [-26:-1 1:26];
nBit = 2500;
ip = rand(1,nBit) > 0.5; % generating 1's and 0's
nBitPerSymbol = 52;
nSymbol = ceil(nBit/nBitPerSymbol);
% BPSK modulation
% bit0 --> -1
% bit1 --> +1
ipMod = 2*ip - 1; %2500 {0 or 1]
ipMod = [ipMod zeros(1,nBitPerSymbol*nSymbol-nBit)]; % 1 x 2548
ipMod = reshape(ipMod,nSymbol,nBitPerSymbol); % 49 x 52
figure(1)
plot(ipMod)
st = []; % empty vector
for ii = 1:nSymbol
inputiFFT = zeros(1,nFFTSize);
% assigning bits a1 to a52 to subcarriers [-26 to -1, 1 to 26]
inputiFFT(subcarrierIndex+nFFTSize/2+1) = ipMod(ii,:);
% shift subcarriers at indices [-26 to -1] to fft input indices [38 to 63]
inputiFFT = fftshift(inputiFFT);
outputiFFT = ifft(inputiFFT,nFFTSize);
% adding cyclic prefix of 16 samples
outputiFFT_with_CP = [outputiFFT(49:64) outputiFFT];
st = [st outputiFFT_with_CP];
end
close all
fsMHz = 20;
[Pxx,W] = pwelch(st,[],[],4096,20);
figure(1)
plot([0:4095]*fsMHz/4095,10*log10(fftshift(Pxx)));
xlabel('frequency, MHz')
ylabel('power spectral density')
title('Transmit spectrum OFDM (based on 802.11a)');
1 comentario
chiju
el 11 de Jun. de 2014
please any idea on how to find the PAPR and spectrum of an OFDM baseband signal?
Ver también
Categorías
Más información sobre OFDM en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!