Power tools Q-Bat use case
This repository shows how to model heat transfer in a power tool’s battery pack in Q-Bat from QuickerSim. The model consists 5 Li-ion cells
Ahora está siguiendo esta publicación
- Verá actualizaciones en las notificaciones de contenido en seguimiento.
- Podrá recibir correos electrónicos, en función de las preferencias de comunicación que haya establecido.
Heat transfer in a power tool’s battery pack modeled in Q-Bat
⬇️ Please use this link instead of the download button: Download link ⬇️
Run power_tools_demo.m or power_tools_demo_ls.mlx to get started
- Please visit the Q-Bat and QuickerSim page to learn more about modeling heat transfer in 3-D systems.
This repository shows how to model heat transfer in a power tool’s battery pack in Q-Bat from QuickerSim. The model consists 5 Li-ion cells connected in series, terminals, connectors, holders and casing and is connected to a reduced-order model (ROM) to model heat transfer in 3D geometry.
The model will be simulated under 3 circumstances:
- Normal operation – Current profile consists of 24 reapeted cycles, which simulate screwing in a screw followed by a break. 360 seconds of operation in total.
- Rapid charging – 30 minutes of charging with constant current of 6A.
- Thermal propagation – One cell is heating significantly more due to malfunction. Heat dissipation from a faulty cell will be checked. 30 minutes of operation.
Simulation Model
Case 1
Case 2
Case 3
Citar como
QuickerSim (2026). Power tools Q-Bat use case (https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.3), GitHub. Recuperado .
Información general
- Versión 1.0.3 (14,3 MB)
-
Ver licencia en GitHub
Compatibilidad con la versión de MATLAB
- Compatible con cualquier versión desde R2018b
Compatibilidad con las plataformas
- Windows
- macOS
- Linux
| Versión | Publicado | Notas de la versión | Action |
|---|---|---|---|
| 1.0.3 | See release notes for this release on GitHub: https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.3 |
||
| 1.0.2.0 | See release notes for this release on GitHub: https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.2 |
||
| 1.0.1.0 | See release notes for this release on GitHub: https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.1 |
||
| 1.0.0 |
