Design & Implementation of RF Microstrip Filter
How to design and implement an RF microstrip filter (of Butterworth type) with stubs using MATLAB
Ahora está siguiendo esta publicación
- Verá actualizaciones en las notificaciones de contenido en seguimiento.
- Podrá recibir correos electrónicos, en función de las preferencias de comunicación que haya establecido.
To design a filter (using stubs), we take the following steps:
(Step 1) Determine the normalized LPF prototype element values from the filter specifications.
(Step 2) Determine the normalized LC values of the prototype LPF.
(Step 3) Convert the L/C values into the impedances of short/open-circuited stubs.
(Step 4) To use Kuroda identity 2 to convert the two SSs (series short-circuited stubs) Z1 and Z3 into POs (parallel open-circuited stubs), we insert UEs between Z1/Z2 and the transmission line, and ...
Section 7.2: Microstrip Filter Implementation of the book "Electronic Circuits with MATLAB, PSpice, and Smith Chart" (Wiley, 2019)
A bunch of m-files and orcad/pspice files listed in the book can be downloaded at
https://wyyang53.wixsite.com/mysite/publications.
Citar como
Won Y. Yang (2026). Design & Implementation of RF Microstrip Filter (https://la.mathworks.com/matlabcentral/fileexchange/173795-design-implementation-of-rf-microstrip-filter), MATLAB Central File Exchange. Recuperado .
Información general
- Versión 1.0.3 (6,8 KB)
Compatibilidad con la versión de MATLAB
- Compatible con cualquier versión
Compatibilidad con las plataformas
- Windows
- macOS
- Linux
