Respondida
How do I get my custom radiation pattern to properly make a custom antenna element in the phased array system toolbox?
Hi Nick, Could you explain your data file a bit? I took a quick look at your script and I noticed that you are using degrees...

más de 10 años hace | 1

| aceptada

Respondida
How do we change the EnabledPolarization to True?
You can turn on the polarization by tgt = phased.RadarTarget('EnablePolarization',true) or tgt = phased.RadarTarge...

más de 10 años hace | 1

Respondida
Help for vectorization??
Here is an example you can try featInd = 1:24636; tempInd = 1:12332; incI = bsxfun(@plus,featInd(:),tempInd); As t...

más de 10 años hace | 1

| aceptada

Respondida
How can I estimate target velocity by pulsed doppler radar in simulink model?
This example explains how to do Doppler estimation in pulsed radar http://www.mathworks.com/help/phased/examples/doppler-esti...

más de 10 años hace | 0

Respondida
why type 2 FIR filter cannot be used to design high pass filter?
This is because for Type II FIR, there is a zero corresponding to Nyqiust rate, i.e., half sampling frequency. However, a high p...

más de 10 años hace | 0

Respondida
BeamscanEstimator example fails when carrier frequency is changed
Hi Roger, Did you update the array? The example uses an array with an element spacing of 0.5 meters, which is half wavelength...

casi 11 años hace | 0

| aceptada

Respondida
inputParser does not support code generation, is that true?
It's not supported. However, if you can do your own parsing in a different branch. For example, if coder.target('MATLAB') ...

casi 11 años hace | 1

Respondida
How do I specify the frrequency response in the look direction for the object phased.FrostBeamformer ?
In |phased.FrostBeamformer|, the look direction response is set to 1. If you are interested in tweak the desired responses, you ...

casi 11 años hace | 0

| aceptada

Respondida
.m to c code
Yes, you can do this via MATLAB Coder. Here is a small video showcasing that. http://www.mathworks.com/videos/generating-c-c...

casi 11 años hace | 0

| aceptada

Respondida
downsample fuction error, I want to know how to design the downsampling filter
This is a third party program and is not provided by MathWorks. I don't know what your goal is but the function is doing what ex...

casi 11 años hace | 0

Respondida
Changing pulse width for linear FM waveform
This does not seem to have all the relevant code but from what I can see you seem to be comparing the received signal sample val...

casi 11 años hace | 0

| aceptada

Respondida
Remove back lobe in ArraySynthesisExample.m
Hi Chris, I'm not sure what you mean here but it seems that you are using an isotropic element. Therefore, the lobe is genera...

casi 11 años hace | 0

| aceptada

Respondida
Array Pattern Synthesis: is first plot not correct?
Hi Chris, This is because in setting up the antennas, the example used a very crude way to remove the response at the back by...

casi 11 años hace | 0

| aceptada

Respondida
fdatool generates coefficients in s domain or z domain?
In general FDATool creates digital filters so they are in z domain.

casi 11 años hace | 0

Respondida
Question regarding Antenna toolbox example provided by mathworks ( beam pattern)
The example actually belongs to Phased Array System Toolbox, not Antenna Toolbox. 1. These are columns 2. wn is the steeri...

casi 11 años hace | 0

Respondida
Acoustic Beamforming using Microphone Array : Recorded Multi Channel Audio
Are you using one wav file for all four channels? For beamformers to work, you will need four separate signals from each microph...

alrededor de 11 años hace | 0

Respondida
How can I create a simple two antenna Tx/Rx chain in Time Domain with Propagation delay, antenna bandwidth, and polarization effects?
Hi Mathew, Maybe you want to take a look at Phased Array System Toolbox and see if it can address some of your needs. http...

alrededor de 11 años hace | 0

Respondida
Using xcorr to cross correlate data that contains "spikes"
You may want to use xcorr(x, y, 'coeff') instead. You will get a higher peak simply because your inserted random numbers...

alrededor de 11 años hace | 0

Respondida
clarification regarding custom Antenna's "Radiation pattern"
Hi Chris, your guess regarding the frequency response is right. It is essentially a simple way to specify the pattern across the...

alrededor de 11 años hace | 0

| aceptada

Respondida
Possible to obtain bistatic clutter model?
Unfortunately there is no bistatic clutter model in Phased Array System Toolbox at this point. Is there any particular model you...

alrededor de 11 años hace | 0

| aceptada

Respondida
SENSORSIG function Matlab HELP
The |sensorsig| function produces a random test signal each time you invoke it. The only thing it does is to modulate the signal...

alrededor de 11 años hace | 0

| aceptada

Respondida
cross correlation between a noise signal and a determined signal
Did you see the scale? When I run your code, the correlation is at the order of 10^-3, I'd say it's fairly small. HTH

alrededor de 11 años hace | 0

Respondida
Question about FMCW radar matlab code
The following demo may be helpful http://www.mathworks.com/help/phased/examples/automotive-adaptive-cruise-control-using-fmcw...

alrededor de 11 años hace | 0

Respondida
How to implement concentric circular array using matlab???
Please refer to the example at http://cn.mathworks.com/help/phased/examples/phased-array-gallery.html There is an concentr...

alrededor de 11 años hace | 1

Respondida
FIR Filter in Simulink
The following function may be helpful to you, it can also be invoked form MATLAB command line http://www.mathworks.com/help/d...

alrededor de 11 años hace | 0

Respondida
fft2 - how does it work
I'm a bit confused by your question, there is no fft2 in your code. All you do is fft along columns. Also for your code, if I ch...

alrededor de 11 años hace | 0

Respondida
How CALL SIMULINK Block from M.file ?
You can use |sim| command http://www.mathworks.com/help/simulink/ug/using-the-sim-command.html

alrededor de 11 años hace | 0

Respondida
Why drawnow ; is given after imshow in matlab?
This is used to flush the graphic queue so you can see the change on screen. This is often used in animation so you can see the ...

alrededor de 11 años hace | 0

Respondida
how to program a delay sum beamformer for a specific target direction
You can use phased.TimeDelayBeamformer to do this if you have access to Phased Array System Toolbox. http://www.mathworks.com...

alrededor de 11 años hace | 0

Resuelto

Fahrenheit to Celsius using multiple statements
Given a Fahrenheit value F, convert to a Celsius value C. While the equation is C = 5/9 * (F - 32), as an exercise use two state...

alrededor de 11 años hace