Respondida
Can Simulink and other simulation software be repeatedly executed through Matlab scripts when simulating together？
Hi yiwei, There are several options for running Simulink simulations from Matlab scripts. Start from Run Simulations and then g...

3 meses hace | 0

Pregunta

Does isAlways Make an Unwarranted Assumption that a Variable is real?
Define a sym variable syms v isAlways can't prove that v is real. Makes sense. isAlways(in(v,'real')) Now make an assumption...

3 meses hace | 0 respuestas | 2

0

respuestas

Respondida
Biquad IIR filter design with Q factor sorting?
Hi Jay, h = fdesign.lowpass('N,Fc', 8, 10e3, 100e3); % 4-biquad with 100kHz sampling rate and 10kHz cutoff freq Hd = design(h...

3 meses hace | 0

| aceptada

Respondida
Unable to access parameters of the block "enable"
The "Data Type" parameter is on the Signal Attributes tab, but as stated in the Block Parameters dialog (as shown in the sceen c...

3 meses hace | 0

| aceptada

Respondida
CONVERT FREQUENCY DOMAIN DATA TO TIME DOMAIIN
Here's an example that illustrates the potential utility and pitfalls of this approach. EDIT: 19 Jan 2026, updated code to ensu...

3 meses hace | 1

Respondida
Can this symbolic expression be simplified anymore?
"In terms of simplifying, you could flip upside down to get rid of the one/over." Can try using numden, though the result might...

4 meses hace | 0

Pregunta

Is the Order of Function Evaluation Guaranteed when Function Outputs are Concatenated into an an Array?
Suppose I call two functions within concatenation into an array A = [ones(1,2),zeros(1,2)] In this case, the order in which on...

4 meses hace | 2 respuestas | 1

2

respuestas

Respondida
How do I perform a proper FFT of a gated segment of a time domain waveform with a logmag amplitude?
Generate a 512-point reference signal in the time domain Ts0 = 0.01; Fs0 = 1/Ts0; N0 = 512; n0 = 0:N0-1; t0 = n0*Ts0; y0 =...

4 meses hace | 0

| aceptada

Respondida
Find the transfer function of a differential equation symbolically
The function isolate comes in handy for this type of problem. syms u(t) y(t) dydt(t) t s Y(s) U(s) y0 dydt0 u0 omega_n z K % S...

4 meses hace | 1

Respondida
Comment utiliser les transformées de Laplace ? How to use Laplace transforms
Hi Gilles, The documentation provides a detailed example at Solve Differential Equations of RLC Circuit Using Laplace Transform...

4 meses hace | 0

Pregunta

How Does interp1 Work if the Sample Points are not Monotonic?
Forever I've thought that the sample points input to @doc:interp1 have to be distinct AND monotonic. But I just saw on the doc p...

4 meses hace | 1 respuesta | 0

1

respuesta

Respondida
Linear interpolation with interp1 is slow: How to improve run times?
Hi Alessandro, The base version of interp1 is an ordinary m-file, so you can see all of the extra processing it needs to do to ...

4 meses hace | 3

| aceptada

Pregunta

Is this Application of Leibniz Rule in Symbolic Math Toolbox Incorrect?
Referring to Leibniz Integral Rule: Verify R2025b matlabRelease Define some functions syms t x syms f_1(x) f_2(x) g(t) Cas...

4 meses hace | 0 respuestas | 0

0

respuestas

Respondida
Trouble with Interp2
Hi Peter, I think the arguments to interp2 are backwards, but there are some other considerations Ir_10nm_Cr_10nm= [... 0....

4 meses hace | 0

| aceptada

Respondida
"diff" function doesn't work properly with small numbers
The data in gora and dol are on the plot as can be seen below when using markers. However, if the y-data pattern is increasing-...

4 meses hace | 1

| aceptada

Discussion

Use of AI to Generate Matlab Code
Inspired in part by Christmas Trees, I'm curious about people's experience using AI to generate Matlab code. 1. Do you use AI t...

4 meses hace | 0

Respondida
Can I use imported from matlab workspace matrix in simulink function block?
Assuming the intent is to implement this function in a Matlab Function block, then see Use Data in Multiple MATLAB Function Blo...

5 meses hace | 0

Respondida
how do I change the abscissa (x -axis) of a cosine wave plot to show degrees
Change the plot command so that the independent variables are in deg. Or define x in terms of deg and then use cosd to compute y...

5 meses hace | 0

| aceptada

Pregunta

Is There an Inconsistency with How Unassigned Values are Filled After an Assignment into a Table?
Create an empty table T = table; Assign a string value to the third row a new variable T.string(3) = "abc" The values in row...

5 meses hace | 2 respuestas | 1

2

respuestas

Respondida
convolution integral with ode45
If c(t) has a Laplace transform then we can take advantage of the convolution property and convert to the s-domain, solve for U(...

5 meses hace | 1

Respondida
How to run code from a later line multiple times without restarting the whole script?
See Create and Run Sections in Code for how to divide the script (assuming it really is a scipt and not a function) into section...

5 meses hace | 0

| aceptada

Respondida
Trouble making a parameter sweep for Simulink
Try out = sim(model); More generally check out Simulink.SimulationInput and Optimize, Estimate, and Sweep Block Parameter Valu...

5 meses hace | 0

| aceptada

Respondida
Help with exporting variables from function to workspace to then run in simulink file
The "modern" way to do this with the sim command is to use a Simulink.SimulationInput as the input. See that doc page to get sta...

5 meses hace | 1

Respondida
Save data from Simulink Scope
"I have this setting: is it correct?" It's correct if you want all of your logged variables to be contained within a single var...

5 meses hace | 0

| aceptada

Respondida
How do I import an audio file into simulink?
Hi Victor, It's not clear why it would be more convenient to do this in Simulink, but if that's really the case then perhaps th...

5 meses hace | 0

| aceptada

Respondida
not saving data in workspace
Proabably because the model is set for a single simulation output. Go to: Model Settings -> Data Import/Export If the box is c...

5 meses hace | 0

Respondida
i am getting error when put definite integral of a ratio whose nemerator & denominator both are definte integral with variable limits.
Hi jagannath, In the original code, lmf and umf are function handles (having nothing to do with the sym variable x), and functi...

5 meses hace | 0

| aceptada

Respondida
Transpose Matrix in Simulink 2020a
The online doc doesn't go back as far as 2020a, but in 2021a one would use the Math Function block. I'm sure (well, nearly sure)...

5 meses hace | 0

Pregunta

Is There a Way to Create a Sequence of Polar Plots in a Tiled Layout Using arrayfun with an Anonymous Function?
Sample data s.th = pi/4:pi/4:2*pi; s.r = [19 6 12 18 16 11 15 15]; s(2) = s(1); s(2).th = s(2).th*1.3; If I want to make two...

5 meses hace | 1 respuesta | 1

1

respuesta

Respondida
effects of ifft2(x, 'symmetric') while x is not conjugate symmetric
It appears that only portions of the input matrix are used when 'symmetric' is specified on input to ifft2 and the input is 2D ...

5 meses hace | 1