Fuzzy Logic Controller with Ruleviewer

R2026b

Evaluate fuzzy inference system and view rules

• 

Fuzzy Logic Controller with Ruleviewer block

To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.

Libraries:
Fuzzy Logic Toolbox

Description

The Fuzzy Logic Controller with Ruleviewer block implements a fuzzy inference system (FIS) in Simulink^® and displays the fuzzy inference process in a rule viewer plot during the simulation. You specify the FIS to evaluate using the FIS name parameter. To change the time between rule viewer updates, specify the Refresh rate parameter in seconds.

For more information on fuzzy inference, see Fuzzy Inference Process.

The Fuzzy Logic Controller with Ruleviewer block does not support all the features supported by the Fuzzy Logic Controller block. The Fuzzy Logic Controller with Ruleviewer block:

• Only supports double-precision data.

• Uses 101 points for discretizing output variable ranges.

• Only supports Interpreted execution simulation mode.

• Does not have additional output ports for accessing intermediate fuzzy inference results.

Examples

Simulate Fuzzy Inference System

Once you have created a fuzzy inference system using Fuzzy Logic Designer or at the command line, you can simulate the system in Simulink.

• Open Live Script

Ports

Input

Port_1(In1) — Input signal

scalar | vector

For a single-input fuzzy inference system, the input is a scalar. For a multi-input fuzzy system, combine the inputs into a vector signal using blocks such as:

• Mux (Simulink)

• Vector Concatenate (Simulink)

• Bus Creator (Simulink)

Output

Port_1(Out1) — Defuzzified output signal

scalar | vector

For a single-output fuzzy inference system, the output is a scalar. For a multi-output fuzzy system, the output is a vector. To split system outputs into scalar signals, use the Demux (Simulink) block.

Parameters

FIS name — Fuzzy inference system to evaluate

mamfis object | sugfis object | mamfistype2 object | sugfistype2 object | FIS file name in quotes | MAT file name in quotes

Fuzzy inference system to evaluate, specified as one of the following:

• mamfis or sugfis object — Specify the name of a type-1 FIS object in the MATLAB^® workspace.

• mamfistype2 or sugfistype2 object — Specify the name of a type-2 FIS object in the MATLAB workspace. (since R2026a)

• Name of a FIS file (*.fis) in the current working folder or on the MATLAB path. Including the file extension in the file name is optional. Specify the filename in quotes. (since R2026a)

• Name of a MAT file (*.mat) in the current working folder or on the MATLAB path. The MAT file must contain only one FIS object. Including the file extension in the file name is optional. Specify the filename in quotes. (since R2026a)

Programmatic Use

To set the block parameter value programmatically, use the set_param (Simulink) function.

Parameter:	FIS
Values:	'"tipper.fis"' (default) | variable name in quotes | file name in quotes

Refresh rate — Time between rule viewer updates

positive scalar

Time between rule viewer updates in seconds, specified as a positive scalar. During simulation, the Rule Viewer display updates at the specified rate to show the inference process for the latest input signal values.

Programmatic Use

To set the block parameter value programmatically, use the set_param (Simulink) function.

Parameter:	Ts
Values:	"2" (default) | positive scalar in quotes

Programmatic Use: Add Block

To add the block programmatically, use the add_block function with one of these library block paths as the source.

"fuzblock/Fuzzy Logic  Controller  with Ruleviewer"

Example: add_block("fuzblock/Fuzzy Logic Controller with Ruleviewer","myModel/myBlock",MakeNameUnique="on")

For information about programmatic access to individual block parameters, see the Programmatic Use section of parameter descriptions on this page.

Extended Capabilities

C/C++ Code Generation

Generate C and C++ code using Simulink® Coder™.

Usage notes and limitations:

• Generating code using the Fuzzy Logic Controller with Ruleviewer block produces the same code as using the Fuzzy Logic Controller block. However, the Fuzzy Logic Controller with Ruleviewer block does not support:

  • Generating code for single-point or fixed-point data.

  • Changing the number of samples for discretizing the output variable range.

Version History

Introduced before R2006a

R2026a: Rule inference display change

The rule inference plot shown during simulation is now generated using the plotrule function. As a result, the appearance of the rule inference display has changed.

R2026a: Specify FIS using FIS file or MAT file

You can specify the FIS to evaluate using a FIS file or MAT file in the current working folder or on the MATLAB path. To do so, specify the FIS name parameter as the name of the file in quotes.

R2026a: Simulate type-2 fuzzy inference systems

You can simulate a type-2 fuzzy inference system by specifying the FIS name parameter as a mamfistype2 or sugfistype2 object.

R2024b: Fuzzy inference system structures not supported

This block no longer supports fuzzy inference system structures. Create fuzzy systems using mamfis and sugfis objects instead.

R2019b: Fuzzy inference system structures will not be supported

Support for fuzzy inference systems structures will be removed in a future release. This change was announced in R2018b. Using fuzzy inference system structures with this block issues a warning starting in R2019b.