Main Content

hdlcoder.OptimizationConfig Class

Namespace: hdlcoder

hdlcoder.optimizeDesign configuration object

Description

Use the hdlcoder.OptimizationConfig object to set options for the hdlcoder.optimizeDesign function.

Maximum Clock Frequency Configuration

To configure hdlcoder.optimizeDesign to maximize the clock frequency of your design:

  • Set ExplorationMode to hdlcoder.OptimizationConfig.ExplorationMode.BestFrequency.

  • Set ResumptionPoint to the default, ''.

You can optionally set IterationLimit and TimingStrategy to nondefault values. HDL Coder™ ignores the TargetFrequency setting.

Target Clock Frequency Configuration

To configure hdlcoder.optimizeDesign to meet a target clock frequency:

  • Set ExplorationMode to hdlcoder.OptimizationConfig.ExplorationMode.TargetFrequency.

  • Set TargetFrequency to your target clock frequency.

  • Set ResumptionPoint to the default, ''.

You can optionally set IterationLimit and TimingStrategy to nondefault values.

Resume From Interruption Configuration

To configure hdlcoder.optimizeDesign to resume after an interruption, specify ResumptionPoint.

When you set ResumptionPoint to a nondefault value, the other properties are ignored.

Creation

optimcfg = hdlcoder.OptimizationConfig creates an hdlcoder.OptimizationConfig object for automatic iterative HDL design optimization.

Properties

expand all

Optimization target mode, specified as one of these values:

hdlcoder.OptimizationConfig.ExplorationMode.BestFrequencyOptimizes the design to try to achieve the maximum clock frequency
hdlcoder.OptimizationConfig.ExplorationMode.BestFrequency is the default.
hdlcoder.OptimizationConfig.ExplorationMode.TargetFrequencyOptimizes the design to try to achieve the specified target clock frequency

Maximum number of optimization iterations before exiting, specified as a positive integer.

If ExplorationMode is hdlcoder.OptimizationConfig.ExplorationMode.BestFrequency, HDL Coder runs this number of iterations.

If ExplorationMode is hdlcoder.OptimizationConfig.ExplorationMode.TargetFrequency, HDL Coder runs the number of iterations needed to meet the target frequency. Otherwise, the coder runs the maximum number of iterations.

Name of folder that contains previously-generated optimization iteration data, specified as a character vector. The folder is a subfolder of hdlexpl, and the folder name begins with the character vector, Iter.

When you set ResumptionPoint to a nondefault value, hdlcoder.optimizeDesign ignores the other configuration object properties.

Example: 'Iter1-26-Sep-2013-10-19-13'

Target clock frequency, specified as a double in MHz. Specify when ExplorationMode is hdlcoder.OptimizationConfig.ExplorationMode.TargetFrequency.

Timing strategy used to calculate the estimated or actual critical path of your design during automatic iterative HDL design optimization. The timing strategy can be set to either Synthesis or CriticalPathEstimation.

SynthesisUses synthesis as the timing strategy to determine the actual critical path of your design. Using Synthesis as your timing strategy can cause a long run time for hdlcoder.OptimizeDesign.
CriticalPathEstimationUse critical path estimation as the timing strategy to determine the estimated critical path of your design. Critical path estimation does not run synthesis nor does it generate HDL code, which significantly shortens the runtime of hdlcoder.OptimizeDesign, while still maintaining optimization accuracy for calculating the critical path.

Examples

collapse all

Open the model and specify the DUT subsystem.

model = 'sfir_fixed';
dutSubsys = 'symmetric_fir';
open_system(model);
hdlset_param(model,'HDLSubsystem',[model,'/',dutSubsys]);

Set your synthesis tool and target device options.

hdlset_param(model,'SynthesisTool','Xilinx Vivado', ...
                   'SynthesisToolChipFamily','Zynq', ...
                   'SynthesisToolDeviceName','xc7z030', ...
                   'SynthesisToolPackageName','fbg484', ...
                   'SynthesisToolSpeedValue','-3')

Enable HDL test bench generation.

hdlset_param(model,'GenerateHDLTestBench','on');

Save your model.

You must save your model if you want to regenerate code later without rerunning the iterative optimizations, or resume your run if it is interrupted. When you use hdlcoder.optimizeDesign to regenerate code or resume an interrupted run, HDL Coder checks the model checksum and generates an error if the model has changed.

Create an optimization configuration object, oc.

oc = hdlcoder.OptimizationConfig;

Set the iteration limit to 10.

oc.IterationLimit = 10;

Optimize the model.

hdlcoder.optimizeDesign(model,oc)
hdlset_param('sfir_fixed', 'HDLSubsystem', 'sfir_fixed/symmetric_fir');
hdlset_param('sfir_fixed', 'SynthesisTool', 'Xilinx Vivado');
hdlset_param('sfir_fixed', 'SynthesisToolChipFamily', 'Zynq');
hdlset_param('sfir_fixed', 'SynthesisToolDeviceName', 'xc7z030');
hdlset_param('sfir_fixed', 'SynthesisToolPackageName', 'fbg484');
hdlset_param('sfir_fixed', 'SynthesisToolSpeedValue', '-3');

Iteration 0
Generate and synthesize HDL code ...
(CP ns) 16.26	(Constraint ns) 5.85	(Elapsed s) 143.66 Iteration 1
Generate and synthesize HDL code ...
(CP ns) 16.26	(Constraint ns) 5.85	(Elapsed s) 278.72 Iteration 2
Generate and synthesize HDL code ...
(CP ns) 10.25	(Constraint ns) 12.73	(Elapsed s) 427.22 Iteration 3
Generate and synthesize HDL code ...
(CP ns) 9.55	(Constraint ns) 9.73	(Elapsed s) 584.37 Iteration 4
Generate and synthesize HDL code ...
(CP ns) 9.55	(Constraint ns) 9.38	(Elapsed s) 741.04 Iteration 5
Generate and synthesize HDL code ...
Exiting because critical path cannot be further improved.
Summary report: summary.html
Achieved Critical Path (CP) Latency : 9.55 ns		Elapsed : 741.04 s
Iteration 0: (CP ns) 16.26	(Constraint ns) 5.85	(Elapsed s) 143.66
Iteration 1: (CP ns) 16.26	(Constraint ns) 5.85	(Elapsed s) 278.72
Iteration 2: (CP ns) 10.25	(Constraint ns) 12.73	(Elapsed s) 427.22
Iteration 3: (CP ns) 9.55	(Constraint ns) 9.73	(Elapsed s) 584.37
Iteration 4: (CP ns) 9.55	(Constraint ns) 9.38	(Elapsed s) 741.04
Final results are saved in
    /tmp/hdlsrc/sfir_fixed/hdlexpl/Final-07-Jan-2014-17-04-41
Validation model: gm_sfir_fixed_vnl

Then HDL Coder stops after five iterations because the fourth and fifth iterations had the same critical path, which indicates that the coder has found the minimum critical path. The design’s maximum clock frequency after optimization is 1 / 9.55 ns, or 104.71 MHz.

Open the model and specify the DUT subsystem.

model = 'sfir_fixed';
dutSubsys = 'symmetric_fir';
open_system(model);
hdlset_param(model,'HDLSubsystem',[model,'/',dutSubsys]);

Set your synthesis tool and target device options.

hdlset_param(model,'SynthesisTool','Xilinx Vivado', ...
                   'SynthesisToolChipFamily','Zynq', ...
                   'SynthesisToolDeviceName','xc7z030', ...
                   'SynthesisToolPackageName','fbg484', ...
                   'SynthesisToolSpeedValue','-3')

Disable HDL test bench generation.

hdlset_param(model,'GenerateHDLTestBench','off');

Save your model.

You must save your model if you want to regenerate code later without rerunning the iterative optimizations, or resume your run if it is interrupted. When you use hdlcoder.optimizeDesign to regenerate code or resume an interrupted run, HDL Coder checks the model checksum and generates an error if the model has changed.

Create an optimization configuration object, oc.

oc = hdlcoder.OptimizationConfig;

Configure the automatic iterative optimization to stop after it reaches a clock frequency of 50MHz, or 10 iterations, whichever comes first.

oc.ExplorationMode = ...
    hdlcoder.OptimizationConfig.ExplorationMode.TargetFrequency;
oc.TargetFrequency = 50;
oc.IterationLimit = 10; =  

Optimize the model.

hdlcoder.optimizeDesign(model,oc)
hdlset_param('sfir_fixed','GenerateHDLTestBench','off');
hdlset_param('sfir_fixed','HDLSubsystem','sfir_fixed/symmetric_fir');
hdlset_param('sfir_fixed','SynthesisTool','Xilinx Vivado');
hdlset_param('sfir_fixed','SynthesisToolChipFamily','Zynq');
hdlset_param('sfir_fixed','SynthesisToolDeviceName','xc7z030');
hdlset_param('sfir_fixed','SynthesisToolPackageName','fbg484');
hdlset_param('sfir_fixed','SynthesisToolSpeedValue','-3');

Iteration 0
Generate and synthesize HDL code ...
(CP ns) 16.26	(Constraint ns) 20.00	(Elapsed s) 134.02 Iteration 1
Generate and synthesize HDL code ...
Exiting because constraint (20.00 ns) has been met (16.26 ns).
Summary report: summary.html
Achieved Critical Path (CP) Latency : 16.26 ns		Elapsed : 134.02 s
Iteration 0: (CP ns) 16.26	(Constraint ns) 20.00	(Elapsed s) 134.02
Final results are saved in
    /tmp/hdlsrc/sfir_fixed/hdlexpl/Final-07-Jan-2014-17-07-14
Validation model: gm_sfir_fixed_vnl

Then HDL Coder stops after one iteration because it has achieved the target clock frequency. The critical path is 16.26 ns, a clock frequency of 61.50 GHz.

Open the model and specify the DUT subsystem.

model = 'sfir_fixed';
dutSubsys = 'symmetric_fir';
open_system(model);
hdlset_param(model,'HDLSubsystem',[model,'/',dutSubsys]);

Set your synthesis tool and target device options to the same values as in the interrupted run.

hdlset_param(model,'SynthesisTool','Xilinx Vivado', ...
                   'SynthesisToolChipFamily','Zynq', ...
                   'SynthesisToolDeviceName','xc7z030', ...
                   'SynthesisToolPackageName','fbg484', ...
                   'SynthesisToolSpeedValue','-3')

Enable HDL test bench generation.

hdlset_param(model,'GenerateHDLTestBench','on');

Create an optimization configuration object, oc.

oc = hdlcoder.OptimizationConfig;

Configure the automatic iterative optimization to run using data from the first iteration of a previous run.

oc.ResumptionPoint = 'Iter5-07-Jan-2014-17-04-29';

Optimize the model.

hdlcoder.optimizeDesign(model,oc)
hdlset_param('sfir_fixed','HDLSubsystem','sfir_fixed/symmetric_fir');
hdlset_param('sfir_fixed','SynthesisTool','Xilinx Vivado');
hdlset_param('sfir_fixed','SynthesisToolChipFamily','Zynq');
hdlset_param('sfir_fixed','SynthesisToolDeviceName','xc7z030');
hdlset_param('sfir_fixed','SynthesisToolPackageName','fbg484');
hdlset_param('sfir_fixed','SynthesisToolSpeedValue','-3');

Try to resume from resumption point: Iter5-07-Jan-2014-17-04-29
Iteration 5
Generate and synthesize HDL code ...
Exiting because critical path cannot be further improved.
Summary report: summary.html
Achieved Critical Path (CP) Latency : 9.55 ns		Elapsed : 741.04 s
Iteration 0: (CP ns) 16.26	(Constraint ns) 5.85	(Elapsed s) 143.66
Iteration 1: (CP ns) 16.26	(Constraint ns) 5.85	(Elapsed s) 278.72
Iteration 2: (CP ns) 10.25	(Constraint ns) 12.73	(Elapsed s) 427.22
Iteration 3: (CP ns) 9.55	(Constraint ns) 9.73	(Elapsed s) 584.37
Iteration 4: (CP ns) 9.55	(Constraint ns) 9.38	(Elapsed s) 741.04
Final results are saved in
    /tmp/hdlsrc/sfir_fixed/hdlexpl/Final-07-Jan-2014-17-07-30
Validation model: gm_sfir_fixed_vnl

Then coder stops after one additional iteration because it has achieved the target clock frequency. The critical path is 9.55 ns, or a clock frequency of 104.71 MHz.

Use CriticalPathEstimation as the TimingStrategy for the optimization configuration object to shorten the run time for hdlcoder.optimizeDesign.

Open the model and specify the DUT subsystem.

model = 'sfir_fixed';
dutSubsys = 'symmetric_fir';
open_system(model);
hdlset_param(model,'HDLSubsystem',[model,'/',dutSubsys]);

Set your synthesis tool and target device options.

hdlset_param(model,'SynthesisTool','Xilinx Vivado', ...
                   'SynthesisToolChipFamily','Zynq', ...
                   'SynthesisToolDeviceName','xc7z030', ...
                   'SynthesisToolPackageName','fbg484', ...
                   'SynthesisToolSpeedValue','-1')

Create an optimization configuration object oc.

oc = hdlcoder.OptimizationConfig;

Set the iteration limit to 10.

oc.IterationLimit = 10;

Set the timing strategy to CriticalPathEstimation.

oc.TimingStrategy = 'CriticalPathEstimation';

Optimize the model by using critical path estimation as the timing strategy.

hdlcoder.optimizeDesign(model,oc)
%% Set Model 'sfir_fixed' HDL parameters
hdlset_param('sfir_fixed', 'HDLSubsystem', 'sfir_fixed/symmetric_fir');
hdlset_param('sfir_fixed', 'SynthesisTool', 'Xilinx Vivado');
hdlset_param('sfir_fixed', 'SynthesisToolChipFamily', 'Zynq');
hdlset_param('sfir_fixed', 'SynthesisToolDeviceName', 'xc7z030');
hdlset_param('sfir_fixed', 'SynthesisToolPackageName', 'fbg484');
hdlset_param('sfir_fixed', 'SynthesisToolSpeedValue', '-1');

Iteration 0
Generate and synthesize HDL code ...
...
(CP ns) 9.94	(Constraint ns) 5.46	(Elapsed s) 4.80
Iteration 9
Generate and synthesize HDL code ...
Exiting because critical path cannot be further improved.
Summary report: summary.html
Achieved Critical Path (CP) Latency : 6.21 ns		Elapsed : 31.33 s
Iteration 0: (CP ns) 9.94	(Constraint ns) 5.46	(Elapsed s) 4.80
Iteration 1: (CP ns) 8.81	(Constraint ns) 5.46	(Elapsed s) 7.90
Iteration 2: (CP ns) 8.77	(Constraint ns) 7.14	(Elapsed s) 11.14
Iteration 3: (CP ns) 7.34	(Constraint ns) 7.14	(Elapsed s) 14.74
Iteration 4: (CP ns) 7.34	(Constraint ns) 7.14	(Elapsed s) 17.99
Iteration 5: (CP ns) 7.34	(Constraint ns) 7.14	(Elapsed s) 21.25
Iteration 6: (CP ns) 7.34	(Constraint ns) 7.14	(Elapsed s) 24.75
Iteration 7: (CP ns) 6.21	(Constraint ns) 7.14	(Elapsed s) 27.95
Iteration 8: (CP ns) 6.21	(Constraint ns) 5.96	(Elapsed s) 31.33

For comparison to the previous results, set the timing strategy to Synthesis (its default) and optimize the model by using hdlcoder.optimizeDesign.

oc.TimingStrategy = 'Synthesis';
hdlcoder.optimizeDesign(model,oc)
%% Set Model 'sfir_fixed' HDL parameters
hdlset_param('sfir_fixed', 'HDLSubsystem', 'sfir_fixed/symmetric_fir');
hdlset_param('sfir_fixed', 'SynthesisTool', 'Xilinx Vivado');
hdlset_param('sfir_fixed', 'SynthesisToolChipFamily', 'Zynq');
hdlset_param('sfir_fixed', 'SynthesisToolDeviceName', 'xc7z030');
hdlset_param('sfir_fixed', 'SynthesisToolPackageName', 'fbg484');
hdlset_param('sfir_fixed', 'SynthesisToolSpeedValue', '-1');

Iteration 0
Generate and synthesize HDL code ...
(CP ns) 9.74	(Constraint ns) 5.21	(Elapsed s) 252.66
Iteration 3
Generate and synthesize HDL code ...
Exiting because critical path cannot be further improved.
Summary report: summary.html
Achieved Critical Path (CP) Latency : 5.49 ns		Elapsed : 704.51 s
Iteration 0: (CP ns) 9.74	(Constraint ns) 5.21	(Elapsed s) 252.66
Iteration 1: (CP ns) 9.74	(Constraint ns) 5.21	(Elapsed s) 479.88
Iteration 2: (CP ns) 5.49	(Constraint ns) 7.95	(Elapsed s) 704.51

 Synthesis Timing StrategyCritical Path Estimation Timing Strategy
Total elapsed time, in seconds704.5131.33

When you use CriticalPathEstimation as the TimingStrategy, the time to run hdlcoder.optimizeDesign is shorter.

The critical path calculated by using CriticalPathEstimation as the TimingStrategy is the estimated critical path delay of the optimized model. The critical path calculated by using Synthesis as the TimingStrategy is the actual critical path delay of the optimized model.

Version History

Introduced in R2014a