lteNSSS

Generate NSSS symbols for subframe

Syntax

sym = lteNSSS(enb)

Description

sym = lteNSSS(enb) generates narrowband secondary synchronization (NSSS) symbols sym for cell-wide settings specified enb.

Examples

Generate NSSS Symbols

Initialize cell-wide settings by specifying a narrowband operation mode, subframe number, frame number, and physical layer cell identity.

enb.OperationMode = 'Standalone';    % Narrowband operation mode
enb.NSubframe = 9;                   % Subframe number
enb.NFrame = 0;                      % Frame number
enb.NNCellID = 1;                    % Physical layer cell identity

Generate the NSSS symbols.

sym = lteNSSS(enb);

Input Arguments

enb — Cell-wide settings

structure

Cell-wide settings, specified as a structure containing these fields:

Name	Required or Optional	Values	Description	Data Types
OperationMode	Optional	'Standalone' (default), 'Inband-SamePCI', 'Inband-DifferentPCI', 'Guardband'	NB-IoT operation mode, specified as one of these values: 'Standalone' – NB-IoT standalone operation within any 180-kHz band outside any LTE carrier bandwidth 'Inband-SamePCI' – NB-IoT in-band operation with the same physical layer cell identity (PCI) as an LTE carrier 'Inband-DifferentPCI' – NB-IoT in-band operation with a different PCI to an LTE carrier 'Guardband' – NB-IoT guard-band operation utilizing unused resource blocks within the guard-band of an LTE carrier	char, string
NNCellID	Required	Integer in the interval [0, 503]	Narrowband PCI	double
NSubframe	Optional	9 (default), integer	Subframe number. Because the NSSS is defined only for subframe 9 in alternate frames, lteNSSS returns an empty array for any value of NSubframe other than 9. This behavior enables resource grid indexing for any subframe number.	double
NFrame	Optional	0 (default), integer	Frame number. Because the NSSS is defined only for subframe 9 in alternate frames, lteNSSS returns an empty vector for odd values of NFrame. This behavior enables resource grid indexing for any subframe number and any frame number. If the NSubframe and NFrame fields are unspecified, lteNSSS assumes NFrame takes its default value.	double
NCellID	Required when you specify OperationMode as 'Inband-SamePCI' or 'Inband-DifferentPCI'	Integer in the interval [0, 503]	PCI	double
CellRefP	Required when you specify OperationMode as 'Inband-SamePCI' or 'Inband-DifferentPCI'	1, 2, 4	Number of cell-specific antenna ports	double

Note

Specify the NCellID and CellRefP fields to exclude cell reference signal (RS) locations. If you do not specify both the NCellID and CellRefP fields, all cell RS locations are included.

Data Types: struct

Output Arguments

sym — NSSS symbols for subframe

complex-valued column vector | empty array

NSSS symbols for a subframe, returned as a complex-valued column vector. If you specify the NSubframe field as any value other than 9 or the NFrame field as an odd value, then lteNSSS returns sym as an empty array.