Simulación de E/S conectada
Conecte el modelo de Simulink® directamente al hardware de Arduino® compatible para un intercambio de datos E/S en directo para un prototipado rápido.
La simulación con E/S conectada es un paso intermedio en el flujo de trabajo de un diseño basado en modelos que reduce las diferencias entre la simulación y la generación de código. Permite al modelo de Simulink comunicarse con el hardware de Arduino antes de desplegar el modelo.
Temas
- Communicate with Hardware Using Connected IO
Get data from hardware peripherals before deploying the Simulink model on the hardware.
- Set Up a Wi-Fi TCP/IP Connection with Connected IO in Simulink
Establish a Wi-Fi TCP/IP connection and simulate model in the connected IO mode.
- Set Up a Wi-Fi UDP Connection with Connected IO in Simulink
Establish a Wi-Fi® UDP connection and simulate model in connected IO mode.
- Measure Servo Motor Shaft Angle Using Device Driver Block in Connected I/O
Enable Connected I/O on a Simulink System object™ block that contains hardware-specific code allowing access to hardware-specific features.
Ejemplos destacados
Prepare, Configure, and Run Simulink Model for Different User Workflows on Arduino
Use the Simulink® Support Package for Arduino® Hardware to prepare, configure, and run a Simulink model for different workflows such as PIL simulation, Connected IO, Monitor and Tune External mode, real-time code profiling, and deployment.
