I want Induction motor specification used in this video?

https://youtu.be/uNs1ScKDO7I

I am seaching for the Induction motor specification (Hardware setup) which is used in this mathwork video?

click on above link.

specification - voltage, current, HP rating, rpm.

Answer 1

[Joel Van Sickel]

This is the motor: EM_Synergy-M800006

You can explore it's lumped parameters by opening the model here: https://www.mathworks.com/help/mcb/gs/field-oriented-control-acim-using-quadrature-encoder.html?searchHighlight=field%20oriented%20control%20induction%20motor&s_tid=srchtitle_field%2520oriented%2520control%2520induction%2520motor_3

[Roberto Di Stefano]

Thanks for your reply Joel. After two years I have a similar problem:

I have a LaunchPad TMS320F28379D with BOOSTXL-DRV8305EVM.

As you surely know, the 8305 board works with 24V and it would be very useful to get an asynchronous motor compatible with this drive.

Unfortunately it appears that the company EM_synergy (emsynergy.com.au) no longer exists.

I tried looking for equivalent machines but without success.

I found this, for example, but the data reported on the web page are contradictory (the declared voltage is 12/24V, but in the data table it is written verbatim "AC single phase/ three phases 110V/120v/220v/ 380v /415v "). This gives me little confidence.

So I'm writing to find out if you have an alternative to the asynchronous machine in this technical sheet:

https://www.ti.com/lit/ug/spruhz8/spruhz8.pdf?ts=1716229412628&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref% 253Den-US

Ths so much, R. D.

[Joel Van Sickel]

Unfortunately I am not aware of good alternatives. That doesn't mean they aren't out there, but they may be hard to find.