- Download and install the Kvaser CANlib SDK from the Kvaser website.
- In Simulink, go to the "Simulink Library Browser" and navigate to the "Support Package Installer".
- Search for the "Kvaser CAN Driver" support package and install it.
- In your Simulink model, add a "CAN Transmit" block and open its configuration window.
- Under the "CAN Parameters" tab, select the "Kvaser CAN Driver" as the driver.
- In the "Channel" dropdown, select the virtual channel you want to use (e.g., "Virtual Channel 1").
- Repeat steps 4-6 for each of your four CAN BUS connections, selecting a different virtual channel for each one.
Need 4 CANBUS Connections
3 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I have a system that contains 4 separate CAN BUSS connections. The Virtual CAN blocks in Simulink only provide 2 CAN channels for Virtual 1. IS there any way to extend this into 4 distinct CAN Channels?
0 comentarios
Respuestas (1)
Aishwarya Shukla
el 31 de Mzo. de 2023
Yes, it is possible to extend the number of virtual CAN channels in Simulink to support 4 separate CAN BUS connections. One way to achieve this is by using third-party CAN driver software, such as the Kvaser CAN driver, which provides support for multiple virtual channels.
To use the Kvaser CAN driver in Simulink, you will need to install the Kvaser CANlib SDK on your computer and then configure the driver in Simulink. Here are the high-level steps to follow:
With these steps, you should be able to extend the number of virtual CAN channels in Simulink to support four separate CAN BUS connections. Note that the exact steps may vary depending on the version of Simulink and the specific CAN driver you are using.
0 comentarios
Ver también
Categorías
Más información sobre Vehicle Network Toolbox en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!