Invalid object handle error
5 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I have the following code which is a graphic rendering of the movement of a satellite around the Earth.
function ex
global state;
fh = figure('Menu','none','Toolbar','none','Units','characters');
hPanAni = uipanel('parent',fh,'Units','characters','Position',...
[22.6 10.4 53 23],'title','Controls','FontSize',11,...
'FontAngle','italic','FontWeight','bold');
hIniAni = uicontrol(hPanAni,'Style','pushbutton','Units','normalized',...
'Position',[0.14 0.75 0.5 0.12],'String','Spin',...
'FontSize',10,'Callback',@hIniAniCallback);
hFinAni = uicontrol(hPanAni,'Style','pushbutton','Units','normalized',...
'Position',[0.14 0.5 0.5 0.12],'String','Stop',...
'FontSize',10,'Callback',@hFinAniCallback);
hResetAni = uicontrol(hPanAni,'Style','pushbutton','Units','normalized',...
'Position',[0.14 0.25 0.5 0.12],'String','Reset',...
'FontSize',10,'Callback',@hResetAniCallback);
hPantSim = uipanel('Parent',fh,'Units','characters',...
'Position',[107.87 8 157.447 42],'BorderType','none','title',...
'Screen','FontSize',11,'FontAngle','italic',...
'FontWeight','bold');
hPantSimInt = uipanel('Parent',hPantSim,'Units','normalized','Position',...
[0 0 1 1],'BorderType','line','BackgroundColor','black');
ah4 = axes('Parent',hPantSimInt,'Units','normalized','Position',...
[0 0 1 1],'Color','none','Visible','off','DataAspectRatio',...
[1 1 1],'NextPlot','add');
rotate3d(ah4);
hgrot = hgtransform('Parent',ah4);
T1 = 0:pi/100:2*pi;
Y = zeros(numel(T1),3);
Y(:,1) = 7000*cos(T1);
Y(:,2) = 7000*sin(T1);
xmin = min(Y(:,1));
ymin = min(Y(:,2));
zmin = min(Y(:,3));
xmax = max(Y(:,1));
ymax = max(Y(:,2));
zmax = max(Y(:,3));
Resf = 6378;
xmin2 = min(xmin,-Resf);
xmax2 = max(xmax,Resf);
ymin2 = min(ymin,-Resf);
ymax2 = max(ymax,Resf);
zmin2 = min(zmin,-Resf);
zmax2 = max(zmax,Resf);
set(ah4,'XLim',[xmin2 xmax2],'YLim',[ymin2 ymax2],'ZLim',[zmin2 zmax2]);
maptext = imread('tierra.jpg');
[X_im, map] = rgb2ind(maptext,128);
[x_esf,y_esf,z_esf] = sphere(50);
x_esf = Resf*x_esf;
y_esf = Resf*y_esf;
z_esf = Resf*z_esf;
props.FaceColor= 'texture';
props.EdgeColor = 'none';
props.Parent = hgrot;
props.Cdata = flipud(X_im); % it is necesary to do this for getting the
% appropiate image on the sphere
surface(x_esf,y_esf,z_esf,props);
colormap(map);
axis equal vis3d;
view(3);
az = 0;
Fin = numel(T1);
k = 2;
ind_ini = 0;
state = 0;
handles.tray = zeros(1,Fin);
handles.psat = line('parent',ah4,'XData',Y(1,1), 'YData',Y(1,2),...
'ZData',Y(1,3),'Marker','o', 'MarkerSize',10,'MarkerFaceColor','b');
function hIniAniCallback(hObject,evt)
if (ind_ini == 1)
return;
end
ind_ini = 1;
state = 0;
while (k<Fin)
az = az + 0.01745329252;
set(hgrot,'Matrix',makehgtform('zrotate',az));
handles.tray(k) = line([Y(k-1,1) Y(k,1)],[Y(k-1,2) Y(k,2)],...
[Y(k-1,3) Y(k,3)],...
'Color','red','LineWidth',3);
set(handles.psat,'XData',Y(k,1),'YData',Y(k,2),'ZData',Y(k,3));
pause(0.02);
k = k + 1,
if (state == 1)
state = 0;
break;
end
end
end
function hFinAniCallback(hObject,evt)
ind_ini = 0;
state = 1;
end
function hResetAniCallback(hObject,evt)
set([handles.tray,handles.psat],'Visible','off');
k = 2;
ind_ini = 0;
state = 1;
az = 0;
set(hgrot,'Matrix',makehgtform('zrotate',az));
handles.psat = line('parent',ah4,'XData',Y(1,1), 'YData',Y(1,2),...
'ZData',Y(1,3),'Marker','o', 'MarkerSize',10,'MarkerFaceColor','b');
end
end
However, when I copy it to my main program I get the following error message:
??? Error using ==> surface Invalid object handle
Error in ==> simorbiv8v3>hIniPropCallback at 1911 surface(x_esf,y_esf,z_esf,props);
??? Error while evaluating uicontrol Callback
I do not understand what is happening.
1 comentario
Walter Roberson
el 25 de Dic. de 2011
Is this question still active? I note that you just edited it, but I thought fixing the cla problem was the solution ?
Respuesta aceptada
Walter Roberson
el 23 de Dic. de 2011
Command
dbstop if error
and then run the code. When it stops at that line, examine props.Parent and in particular check ishandle(props.Parent) . If it says that it is not a handle, chase further up to ah4 and make sure that it is still a handle, then up to hPantSimInt and then to hPantSim and then to fh
4 comentarios
Walter Roberson
el 24 de Dic. de 2011
I don't understand about the global part. You do not show any global for hgrot or for props, but you do show hgtransform being called explicitly.
At what point in the sequence of commands does ishandle(hgrot) become false? Is it true immediately before the surface() call?
Más respuestas (1)
Ver también
Categorías
Más información sobre Specifying Target for Graphics Output en Help Center y File Exchange.
Productos
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!