Designing bus signals with same names but different buses
4 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Hello all,
I have a simulink block with two buses which have a signal with the same name.
AB_c.x1, HJ_k.x1.
I would like to make the signals x1 and x1 as an input to the block. Does anybody know how this can be done?
Thanks in advance.
Cheers, Rashmi
3 comentarios
ES
el 3 de Ag. de 2017
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/186012/image.png)
You can directly connect the selected signal to a subsystem. It has no harm. See above, signal x is connected to 'a'.
If you definitely need the names to match (for naming convention reasons etc) you can rename the signal by putting a passive block (like gain block above) and change the name.
Respuestas (2)
ES
el 3 de Ag. de 2017
You should use bus selector to select the members you need and take it to subsystem with simple inports (non-bus).
0 comentarios
ES
el 3 de Ag. de 2017
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/177665/image.png)
You can directly connect the selected signal to a subsystem. It has no harm. See above, signal x is connected to 'a'.
If you definitely need the names to match (for naming convention reasons etc) you can rename the signal by putting a passive block (like gain block above) and change the name.
1 comentario
Ver también
Categorías
Más información sobre Schedule Model Components en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!