Is it possible to create a custom board for the HDL Coder with the zynq z7100

Is it possible to create a custom board for the HDL Coder with the zynq z7100? If i try to create a custom board via the HDL Workflow Advisor it is only possible to select a zynq 7045.

Answer 1

[Wang Chen]

Hi Patrick,

Yes, when using IP core generation workflow in HDL Coder, you can create custom board support for a board with Zynq Z-7100 device.

Here are a few examples which show how to create a custom board and reference design definition:

https://www.mathworks.com/help/hdlcoder/ug/define-and-register-custom-board-and-reference-design-for-zynq-workflow.html

https://www.mathworks.com/help/hdlcoder/examples/authoring-a-reference-design-for-audio-system-on-a-zynq-board.html

The documentation:

https://www.mathworks.com/help/hdlcoder/ug/board-and-reference-design-system.html

You can also take a look at the shipping board support files, which are located in the HDL Coder Zynq support package installation folder.

Thanks, Wang