Invalid expression. When calling a function or indexing a variable, use parentheses. Otherwise, check for mismatched delimiters.

4 visualizaciones (últimos 30 días)
I am trying to run this code but it gives me a lot of error. The first message is "Invalid expression. When calling a function or indexing a variable, use parentheses. Otherwise, check for
mismatched delimiters."
varInput = load('quadData.mat');
qDat = varInput.quadrotor;
[n,-] = size(qDat);
Xi_0 = [qDat(1,2:4)'; qDat(1,8:10)'];
v = qDat(:,11:13);
omega = qDat(:,11:13);
t=qDat(:,1);
dt=qDat(2,1) - qDat(1,1);
T_initial = qDat(1,1);
T_final = qDat(end,1);
pose_dot(1,Xi_0,{dt,v,omega});
[t_out,Xi] = ode45(@pose_dot,[T_initial T_final],Xi_0);
figure
plot(t_out,Xi(:,4:6)*(180/pi),':');
hold on
plot(t,qDat(:,8:10)*(180/pi),'-');
legend('\phi_{calc}', '\theta_{calc}','\psi_{calc}','\phi_{true}','\theta_{true}','\phi_{true}');
grid on
title('Euler Angle vs. Time');
ylabel('Euler Angle o');
xlabel('Time s');
figure
plot(t_out,Xi(:,1:3),':');
hold on
plot(t,qDat(:,2:4),'-');
legend('x_{calc}','y_{calc}','z_{calc}','x_{true}','y_{true}','z_{true}');
grid on
title('Position vs. Time');
xlabel('Time m');
ylabel('Position m');
function Xi_dot = pose_dot(t,Xi,prstVars)
if nargin > 2
dt = prstVars{1};
v = prstVars{2};
omega = prstVars{3};
end
ind = floor(t/dt) + 1;
nu = [v(ind,:)'; omega(ind,:)'];
cPsi = cos(Xi(6));
sPsi = sin(Xi(6));
cTh = cos(Xi(5));
sTh = sin(Xi(5));
cPhi = cos(Xi(4));
sPhi = sin(Xi(4));
tTh = tan(Xi(5));
Xi_dot=[cPsi*cTh cPsi*sTh*sPhi-sPsi*cPhi sPsi*sPhi+cPsi*sTh*cPhi 0 0 0;sPsi*cTh cPsi*cPhi+sPsi*sTh*sPhi sPsi*sTh*cPhi-cPsi*sPhi 0 0 0;-sTh cTh*sPhi cTh*sPhi cTh*cPhi 0 0 0;0 0 0 1 sPhi*tTh cPhi*tTh;0 0 0 0 cPhi -sPhi; 0 0 0 0 sPhi/cTh cPhi/cTh]*nu;
end

Respuesta aceptada

Stephan
Stephan el 8 de Oct. de 2019
Try:
varInput = load('quadData.mat');
qDat = varInput.quadrotor;
[n,~] = size(qDat);
Xi_0 = [qDat(1,2:4)'; qDat(1,8:10)'];
v = qDat(:,11:13);
omega = qDat(:,11:13);
t=qDat(:,1);
dt=qDat(2,1) - qDat(1,1);
T_initial = qDat(1,1);
T_final = qDat(end,1);
pose_dot(1,Xi_0,dt,v,omega);
[t_out,Xi] = ode45(@(t,Xi)pose_dot(t,Xi,dt,v,omega),[T_initial T_final],Xi_0);
figure
plot(t_out,Xi(:,4:6)*(180/pi),':');
hold on
plot(t,qDat(:,8:10)*(180/pi),'-');
legend('\phi_{calc}', '\theta_{calc}','\psi_{calc}','\phi_{true}','\theta_{true}','\phi_{true}');
grid on
title('Euler Angle vs. Time');
ylabel('Euler Angle o');
xlabel('Time s');
figure
plot(t_out,Xi(:,1:3),':');
hold on
plot(t,qDat(:,2:4),'-');
legend('x_{calc}','y_{calc}','z_{calc}','x_{true}','y_{true}','z_{true}');
grid on
title('Position vs. Time');
xlabel('Time m');
ylabel('Position m');
function Xi_dot = pose_dot(t,Xi,dt,v,omega)
ind = floor(t/dt) + 1;
nu = [v(ind,:)'; omega(ind,:)'];
cPsi = cos(Xi(6));
sPsi = sin(Xi(6));
cTh = cos(Xi(5));
sTh = sin(Xi(5));
cPhi = cos(Xi(4));
sPhi = sin(Xi(4));
tTh = tan(Xi(5));
Xi_dot=[cPsi*cTh cPsi*sTh*sPhi-sPsi*cPhi sPsi*sPhi+cPsi*sTh*cPhi 0 0 0;sPsi*cTh cPsi*cPhi+sPsi*sTh*sPhi sPsi*sTh*cPhi-cPsi*sPhi 0 0 0;-sTh cTh*sPhi cTh*sPhi cTh*cPhi 0 0 ;0 0 0 1 sPhi*tTh cPhi*tTh;0 0 0 0 cPhi -sPhi; 0 0 0 0 sPhi/cTh cPhi/cTh]*nu;
end

Más respuestas (0)

Categorías

Más información sobre Data Import and Analysis en Help Center y File Exchange.

Etiquetas

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by