How to plot separately figures?

1 view (last 30 days)
I want to plot a second figure with 2x1 subplot, the first subplot must contain both x (original signal) and xn(noise added signal), and second subplot must contain x (original signal) and y(filtered signal). What should I change ?
fs = 5000;
tiv=1/fs;
t = 0:tiv:0.05;
t1=2*pi*100*t;
t2=2*pi*500*t;
x = sin(t1)+0.7*cos(t2);
xn = x + 5.*randn(size(t));
originalSpectrum = fft(x);
noisySpectrum = fft(xn);
xdb=mag2db(originalSpectrum);
xndb=mag2db(abs(noisySpectrum));
figure(1)
subplot(2, 1, 1);
plot((xdb),'b-', 'LineWidth', 2);
xlabel('Frequency (Hz)')
ylabel('Magnitude(dB)')
title('Original Signal (No Noise)')
subplot(2, 1, 2);
plot(abs(xndb), 'b-', 'LineWidth', 2);
xlabel('Frequency (Hz)')
ylabel('Magnitude(dB)')
title('Noisy Signal')
d = designfilt('lowpassfir', 'PassbandFrequency', 500, ...
'StopbandFrequency', 600, ...
'PassbandRipple', 1, 'StopbandAttenuation', 100, ...
'SampleRate', fs);
y=filter(d,x);
figure(2)
subplot(2,1,1);
plot(x); hold on; plot(xn);
subplot(2,1,2);
plot(x); hold on; plot(y);
  1 Comment
Jaya
Jaya on 22 May 2021
What is the problem you are facing? Please state it. Because the code is producing the graphs.

Sign in to comment.

Accepted Answer

Sulaymon Eshkabilov
Sulaymon Eshkabilov on 22 May 2021
Here are the plot parts as you were aiming to get:
...
subplot(2,1,1);
plot(t, x, 'b', t, xn, 'r'); grid on
legend('Original Signal', 'Noise Added Signal')
ylabel('Signal')
subplot(2,1,2);
plot(t, x, 'b', t, y, 'r');
legend('Original Signal', 'Filtered Signal', 'location', 'southwest')
ylabel('Signal'), xlabel('Time')
Good luck

More Answers (0)

Categories

Find more on Line Plots in Help Center and File Exchange

Products


Release

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by