Resultados de
Buenas noches. Tengo una estación meteorológica contruida con Arduino, desde hace 4 años y funcionando perfectamente, y veo los datos mediante ThingSpeak. El problema es el que se ve en la imagen:
La méteo, gestionada por una placa Arduino Wemos D1 Mini Pro, una placa solar, una batería y un sensor BME280, funciona cada hora. És decir, está hivernando y cada hora, durante un breve lapso de tiempo, despierta y emite los datos. ThingSpeak los envía a mi ordenador. El problema es que durante 4 años, ha estado enviando, cada hora, una sola lectura de los datos, però ahora envía dos o tres datos con minutos de diferencia, con lo que la lectura y procesamiento de estos datos, se ha vuelto inestable.
No se si es debido a una reinstalación del sistema operativo, debido a un problema que he tenido con el SO, o a qué, pero quisiera volver a ver los datos de forma única, un solo dato cada hora. He sustituido la placa Arduino por otra, pero el problema persiste sin solucionarse, con lo que deduzco que posoblemente deba atribuirse al programa ThingSpeak.
Sería posible solucionar este problema? Hay alguna manera de acceder a modificar, específicamente, esta configuración para volver a mostrar únicamente una lectura por hora?
Gracias por la atención y la ayuda
Salu2 cordiales
I'd like to give someone quick access to a private channel via a URL. Basically, I'd like to place a QR code sticker on the device so that any time they want, they can quickly check out how the device data is trending by pointing their cell phone camera at the QR code and clicking. Ez-peezie. This works with a public channel because no authentication is required,
Is there a way to do this with a private channel? I was hoping I could add their email address to the sharing tab for the channel and then, after they had logged into Thingspeak on their phone with their own account, perhaps their browser state would be retained and when the camera launched a browser tab with the url, it would work. But alas, I've probably over-simplied the credentials aspect betwen the camera app and the brower app. At least it doesn't seem to work with Safari or Chrome on IOS.
Does anyone know of an easy way (easy for the end user) to make this work?
Over at Reddit, a MATLAB user asked about when to use a script vs. a live script. How would you answer this?
Hi
I am using simulink for the frequency response analysis of the three phase induction motor stator winding.
The problem is that i can't optimise the pramaeter values manually, for this i have to use genetic algrothem. But iam stucked how to use genetic algorithum to optimise my circuit paramter values like RLC. Any guidence will be highly appreciated.
It is not possible to link ThingTweet with Twitter. When I authorize through "Authorize ThingTweet to access your account?", it says "Redirecting you back to the application. This may take a few moments" and logout in thingtweet. Its looping. How to fix this issue?
It didn't work even after deleting cookies or trying with MS edge browser as detailed here
https://www.mathworks.com/matlabcentral/discussions/thingspeak/794152-cannot-signin-to-thingspeak/2519972
Starting with MATLAB can be daunting, but the right resources make all the difference. In my experience, the combination of MATLAB Onramp and Cody offers an engaging start.
MATLAB Onramp introduces you to MATLAB's basic features and workflows. Then practice your coding skill on Cody. Challenge yourself to solve 1 basic problem every day for a month! This consistent practice can significantly enhance your proficiency.
What other resources have helped you on your MATLAB journey? Share your recommendations and let's create a comprehensive learning path for beginners!
Sending temperature and humidity values to a thingSpeak channel using a NodeMCU(esp8266) and the ThingSpeak library. The problem is that the graphs do not update dynamically even if values are sent and received regularly. To update the graphs I have to refresh the page every time. The numeric displays and other widgets update regularly. How can I solve the problem?
I'm having problem in its test 6 ... passing 5/6 what would be the real issue..
am wring Transformation matrix correct.. as question said SSW should be 202.5 degree...
so what is the issue..
I am a beginner of deep learning, and meet with some problems in learning the MATLAB example "Denoise Signals with Adversarial Learning Denoiser Model", hope very much to get help!
1. visualizaition of the features
It is my understanding that the encoded representation of the autoencoder is the features of the original signal. However in this example, the output dimension of the encoder is 64xSignalLength. Does it mean that every sample point of the signal has 64 features?
2. usage of the residual blocks
The encoder-decoder model uses residual blocks (which contribute to reconstructing the denoised signal from the latent space, ). However, only the encoder output is connected to the discriminator. Doesn't it cause the prolem that most features will be learned by the residual blocks, and only a few features that could confuse the discriminator will be learned by the encoder and sent to the discriminator?
I would tell myself to understand vectorization. MATLAB is designed for operating on whole arrays and matrices at once. This is often more efficient than using loops.
I cannot get any of my charts to be interactive using matlab. I need to be able to zoom into a chart and I cannot get any interactivity. In its purest from shouldnt this allow me to zoom into a chart?
plot(time, data);
% Enable zooming
zoom on;
(free account)
Ich habe das Problem das ich immer nur 1 Tag aufzeichnen kann (siehe Anhang), obwohl ich den Parameter au 15 tage gestellt habe.
Dear Community,
Since few weeks it looks like I have lost the ability to move cards order in the channel view. I used to be able to to so.
I tried with different browser and even on mobile and it does not work anymore. Did missed something ? Is this feature been removed ?
Thanks.
Tengo semanas trabajando con la app y al subir informacion me aparece que la ultima entrada fue hace menos de un minuto pero las gráficas no se actualizan, ya intente abrir la app desde diferentes navegadores,y dispositivos, en modo incognito, desabilitar extenciones y no obtengo resultados.
I am trying t set up a cellular Particle Boron and Sensor to track my well water levels but the data is not showing up in Thingspeak. I have activated and flashed code to the device, created a Particle account, a Thingspeak account (and channel), and a Webhook. Things mostly work as they should and I can even see the data from the sensor in my Particle Console "Events", but nothing seems to arrive in the Thingspeak Channel. I am looking for technical advice.
Graham
Hello,
it's been a couple weeks that the webrowser client seems to have issues for me.
I can't move the chart with my mouse anymore. And the Average option doesn't do anything, it is always displaying all the datapoints.
Same with the type of points, it is stuck on line type whatever I ask.
Also it will not update the page automatically when new points are uploaded, I have to hit F5 to refresh myself.
I can still control the number of days displayed though.
I tried on brave, firefox and edge and it all behaves the same.
Edit : I see that there are already multiple threads referencing some of those issues already. So the moderator can delete the thread if he feels like it is unecessary.
I have been developing a neural net to extract a set of generative parameters from an image of a 2-D NMR spectrum. I use a pair of convolution layers each followed by a fullyconnected layer; the pair are joined by an addtion layer and that fed to a regression layer. This trains fine, but answers are sub-optimal. I woudl like to add a fully connected layer between the addtion layer and regression, but training using default training scripts simply won't converge. Any suggestions? Maybe I can start with the pre-trained weights for the convolution layers, but I don't know how to do this.
JHP
I get the following error message when using a DELETE command.
I am using the correct api_key and channel ID Error Response: { "status": "401", "error": { "error_code": "error_auth_required", "message": "Authorization Required", "details": "Please provide proper authentication details." } }
I just cannot find out what I'm doing wrong. I've used Postman and Curl apps.
Can anyone help?
how can I do to get those informations?
