Data Logger on Arduino UNO

Versión 1.4.0.0 (584 KB) por Techsource Technical Team
Program a Data Logging Shield using the S-Function Builder
4.0
(1)
8,9K Descargas
Actualizado 26 abr 2016

Ver licencia

This Simulink Model uses the S-Function Builder to program a Data Logging Shield attached to an Arduino UNO.
It is makes use of existing C-code by Adafruit Industries (see below link), and shows how to integrate it into Simulink.
https://learn.adafruit.com/adafruit-data-logger-shield/overview
The data logger is portable and enables you to log sensor readings based on the sample time you set. The shield houses a real-time clock (RTC) that is powered by an external battery. This means that the clock is continuously ticking, regardless of whether the board is powered up or not. Data is logged onto an SD card in .csv format.

You can connect the external circuit to an LDR to log light intensity in a room. Alternatively, you can utilize other sensors.

Blog post on the data logger:
https://dashboardproject.wordpress.com/2015/12/29/simulink-device-driver-for-adafruit-data-logger-shield/

**NEW** Youtube Demonstration:
https://www.youtube.com/watch?v=RuIEY9heaSk

By: Esther Ling, Edu Engineer

Citar como

Techsource Technical Team (2024). Data Logger on Arduino UNO (https://www.mathworks.com/matlabcentral/fileexchange/51710-data-logger-on-arduino-uno), MATLAB Central File Exchange. Recuperado .

Compatibilidad con la versión de MATLAB
Se creó con R2015a
Compatible con cualquier versión
Compatibilidad con las plataformas
Windows macOS Linux
Categorías
Más información sobre Prepare Model Inputs and Outputs en Help Center y MATLAB Answers.
Agradecimientos

Inspirado por: Device Drivers

Inspiración para: Driver for Arduino Data Logging Shield

Comunidades de usuarios

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Versión Publicado Notas de la versión
1.4.0.0

Added Youtube demo link.
1.3.0.0

Update
1.2.0.0

Added blog post on submission.
1.1.0.0

Added image to mask.
Removed GNU-licensed libraries and added information in the documentation on how to locate them.
1.0.0.0

Added copyright lines to renc2cpp function.