MATLAB AND SIMULINK HARDWARE CHALLENGE: Robot arm MatLab files

Versión 1.0.0.0 (10,2 KB) por David Yu
Controls a robot arm through the use of Kinect 2.0
5.0
(1)
325 Descargas
Actualizado 25 jul 2016

Ver licencia

This script is responsible for getting 3D data from the Kinect, where we have used the MATLAB interface for Kinect 2.0 by Terven Juan and Cordova-Esparza Diana. After we have gotten the 3D coordinates we have used the inverse kinematics and Newton's method to find the rotational angles required for the robot. Then we output the rotational angles via serial to the Arduino and wait for a finish flag from the Arduino when it has finished moving the motors to its position.
We are transferring 7 bytes of information to the Arudino, first three are for the angles, and the next three are for the directions and the last byte is for the hand state.

https://www.youtube.com/watch?v=GL4GasN--xw

Citar como

David Yu (2024). MATLAB AND SIMULINK HARDWARE CHALLENGE: Robot arm MatLab files (https://www.mathworks.com/matlabcentral/fileexchange/58371-matlab-and-simulink-hardware-challenge-robot-arm-matlab-files), MATLAB Central File Exchange. Recuperado .

Compatibilidad con la versión de MATLAB
Se creó con R2015b
Compatible con cualquier versión
Compatibilidad con las plataformas
Windows macOS Linux
Agradecimientos

Inspirado por: Kinect 2 Interface for Matlab

Comunidades de usuarios

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Versión Publicado Notas de la versión
1.0.0.0

Nothing is updated