photo

Jocie Kluger

Last seen: 4 días hace |  Con actividad desde 2017

Followers: 0   Following: 0

Estadística

All
  • Personal Best Downloads Level 2
  • 5-Star Galaxy Level 1
  • First Submission
  • GitHub Submissions Level 1
  • Revival Level 2
  • Knowledgeable Level 2
  • First Answer

Ver insignias

Feeds

Ver por

Respondida
How to model ball vavle sealing at both ends of travel limits
Hi Michael, I recommend using Physical Signal blocks like PS Abs to transform the control signal that's fed into the Ball Valve...

alrededor de 3 años hace | 0

Respondida
Using a flow coefficient (Cv value) in SymHydraulics
One approach could be to use an Orifice block with area and discharge coefficient parameters. The flow rate equation of this blo...

más de 3 años hace | 0

Respondida
Change the minimum displacement of a variable-displacement pressured-compensated pump
Hi Sebastian, This is a limitation of the Variable-Displacement Pressure-Compensated Pump in the Hydrualic domain. The Pressure...

más de 3 años hace | 1

| aceptada

Respondida
ball valve model (not understanding)
Hi Noman, While the libraries do not contain valves with direct rotary control, a workaround is to add a PS Gain block with '1 ...

más de 3 años hace | 0

Respondida
ball valve in simscape
Hi Mohammad, While the libraries do not contain valves with direct rotary control, a workaround is to add a PS Gain block with ...

más de 3 años hace | 0

Respondida
4 way 2 position directional control valve in simscape fluid
Hi Murali, The 4-Way 2-Position valve was introduced to the Isothermal Liquid library in R2021a. For other domains and releases...

casi 4 años hace | 1

Respondida
Angular velocity of the Fixed displacement pump
Hi Yaseer, You should use the constant value with the Ideal angular velocity source, as shown in the picture. As described in t...

casi 4 años hace | 1

Respondida
problem in fluid properties of the hydraulic system
This model might not be sensitive to the changes to the viscosity and density. Please upload a model that reproduces the issue, ...

alrededor de 4 años hace | 0

Respondida
How do I build pulley systems with 3 or more pulleys?
Hi Felix, As you mention, try changing the “Belt direction” in one of the pulleys from “Ends move in opposite direction” to “En...

más de 4 años hace | 1

| aceptada

Respondida
Bearing model for vibration analysis
Another approach could be to set bearing stiffness and damping as functions of rotor speed or constants in the Driveline Flexibl...

más de 5 años hace | 0

Respondida
Can I extract numerical data from a coloured CFD-plot?
Try the rgb2ind function. It associates each pixel with an index value, so then it should be straightforward to correlate the co...

más de 7 años hace | 0

Respondida
How to access combustion engine map from powertrain block set
Double-click on the Mapped Core Engine block to view the editable predefined speed and torque breakpoints, and corresponding loo...

más de 7 años hace | 1

| aceptada

Respondida
Drawing a segment of a cylinder from a matrix
The general idea is to reshape the z, r, and theta coordinates into 2D matrices of size (53*37) x 9 that correspond to the color...

más de 7 años hace | 0

| aceptada