Community Profile

photo

Ayush Srivastava


Last seen: casi 4 años hace Con actividad desde 2020

Estadísticas

  • Thankful Level 2
  • Thankful Level 1

Ver insignias

Content Feed

Ver por

Pregunta


How to generate the HDL Code from the Simulink Model?
I have to generate the HDL code for the Simulink model

casi 4 años hace | 1 respuesta | 0

1

respuesta

Pregunta


How to linearize the plant for tuning the parameters of the PID Controller?
In my design, there is a problem coming that the plant cannot be linearized for tuning the parameter of PID controller. So, How...

casi 4 años hace | 1 respuesta | 0

1

respuesta

Pregunta


Why there is a sudden jump from 0 to 2pi and from 2pi to 0 in position of DC motor in my Design in simulink? And why are the continuous simulations occurring in my design
Here is a sudden jump from 0 to 2pi and from 2pi to 0 in position of DC motor in my Design in simulink. I want to know why this ...

casi 4 años hace | 1 respuesta | 0

1

respuesta

Pregunta


Why there is a problem coming in the waveform of the speed control measurement of the DC motor in the simulink?
The Speed is suddenly changes in the waveform and I think the speed waveform or estimation in the simulink is not appropriate. ...

alrededor de 4 años hace | 0 respuestas | 0

0

respuestas

Pregunta


Why there is a problem coming in the connection although I am using a Voltage sensor compatible block for this?
There is a problem coming in the connection although I am using a Voltage sensor compatible block for this. I want to know what...

alrededor de 4 años hace | 2 respuestas | 0

2

respuestas

Pregunta


How to check the outputs of the Incremental Shaft Encoder in Simulink?
There is a problem coming in checking the outputs of the incremental shaft encoder in Simulink.

alrededor de 4 años hace | 1 respuesta | 0

1

respuesta

Pregunta


How to connect the outputs of the Incremental Shaft Encoder to the inputs of the Quadrature Shaft Decoder in Simulink.?
There is a problem coming in the connection, while I am connecting the output of the Incremental Shaft Encoder to the input of t...

alrededor de 4 años hace | 0 respuestas | 0

0

respuestas