Honglei Chen

MathWorks

Last seen: 24 días hace | Con actividad desde 2011

Followers: 2 Following: 0

Mensaje

I am a developer on Phased Array System Toolbox at MathWorks

DISCLAIMER: Any advice or opinions posted here are my own, and in no way reflect that of MathWorks.

Professional Interests: Signal Processing, Array Processing, Radar, and Communication

Estadística

All

Ver insignias

Feeds

Respondida
How to optimize the antenna weight of a two-dimensional array to generate null in a specific direction
Your script is pretty close, you just need to set up the desired response properly. However, you could take advantage of the pat...

6 meses hace | 0

Respondida
how get the range from FFT on FMCW radar data
You may want to look at the following example, especially the "Range and Doppler Estimation" section. It shows how to extract th...

7 meses hace | 0

Respondida
phased array antenna simulation
You can set the ArrayAxis in phased.ULA to 'x' to achieve that. Hope this helps

8 meses hace | 0

Respondida
How to modify the response of a antenna element with respect to different opearting frequency in the specified frequency range?
As Manikanta mentioned in the comment, you can set up a phased.CustomAntennaElement to specify a pattern that is not constant ac...

8 meses hace | 0

Respondida
Ti 6843 mmWave sensor - How can I get micro-Doppler?
TI6843 itself does not have capability to output raw data. It only outputs the processed data. Therefore, as is you cannot deriv...

8 meses hace | 0

Respondida
Relationship of array factor and directivity for an antenna array
I agree with your array factor definition but I don't quite follow your reasoning on normalization. I don't think there should ...

9 meses hace | 0

Respondida
Anyone has TOPS model in WideBand Signal DOA?
There is no off the shelf TOPS algorithm implementation in MathWorks offering, but there are tools in Phased Array System Toolbo...

9 meses hace | 0

| aceptada

Respondida
What is the difference between Signal Processing Toolbox and DSP System Toolbox R2023a?
While Signal Processing Toolbox supports performing signal processing and analysis (resampling, power spectrum estimation, visua...

más de 1 año hace | 2

| aceptada

Respondida
Getting steered beam gain in Phased Array Toolbox
Hi Peter, Happy new year! The pattern() computation does take into consideration of beam broadening. However, uniform linear ar...

casi 2 años hace | 0

Respondida
Trouble in codegen customized antenna pattern
I don't know how x is formed, but here is an example you can take a look, that generates the code. The main idea is to push patt...

más de 3 años hace | 0

Respondida
Adding Tapering and Time Delay
Unfortuantely at this point there is no straightforward way to combine the element taper with time steering. At this point, I th...

más de 4 años hace | 0

| aceptada

Respondida
Antenna Pattern plot Phase
Looks like you are using Phased Array System Toolbox and it currently doesn't support 'phase' as a type. We will try to address ...

más de 4 años hace | 0

| aceptada

Respondida
Wideband LOS channel block - propagate to multiple destinations
Could you share how you invoked the block? My guess is your signal is a single column vector while the block is expecting a matr...

más de 4 años hace | 1

| aceptada

Respondida
What is the maths behind findpeaks function on matlab?
There is no specific name for the algorithm. Essentially it looks for points that is larger than the two adjacent points. Is the...

más de 4 años hace | 0

Respondida
Phased Array Toolbox Directivity Calculation
It would be helpful if you could share which textbook theory you are referring too. Directivity is often used interchangeablly w...

más de 4 años hace | 0

Respondida
Internal error in phased array toolbox applications.
This bug has been fixed in R2019b Update 2. If you get any update later than that, it should work properly. For more details, yo...

más de 4 años hace | 0

| aceptada

Respondida
epsilon-neighborhood for polar coordinates
I'll explain how clusterDBSCAN works in this situation. In your case, range and angle will be two features so you can specify e...

más de 4 años hace | 0

Respondida
Backscatter Bycicle/Pedestrian Sampling Frequency
It seems that you are tring to simulate the radar echo. In that case, I don't think you can lift that constraint. In real applic...

más de 4 años hace | 0

Respondida
FMCW 24 GHz automotive Radar mmWaves simulation (Target Range&Speed Detection)
You can just randomly generate some range and speeds based on a trajectory. For example, phased.Platform can help generate some ...

más de 4 años hace | 0

Respondida
Angle Doppler response using FFT
I notice that you are using 128th range gate for plotting. Are you sure you have the correct target there? You can try to verif...

más de 4 años hace | 0

| aceptada

Respondida
Electronic steering of clutter using phased.constantgamma clutter model
This is a good enhancement request, unfortunatly at this point the electronic scanning is not supported. We'll see if we can add...

más de 4 años hace | 0

| aceptada

Respondida
Can I use phased.BackscatterPedestrian and phased.FMCWWaveform to simulate wideband echo, like fc=77GHz, BW=4GHz?
There is nothing prevents you to set the bandwidth to 4GHz. The only thing you need to be cautious is that with such a bandwidth...

más de 4 años hace | 0

Respondida
Phased Array System Toolbox: DOA with MVDREstimator using output data after Range-Doppler FFTs
To perform DOA estimation, the data input has to be across number of channels, i.e., number of elements in the array. On the oth...

más de 4 años hace | 0

Respondida
Simulation of range ambiguous clutter in phased array toolbox
phased.ConstantGammaClutter simulates clutter up to the horizon range. So it already builds the range ambuity in. HTH

más de 4 años hace | 0

| aceptada

Respondida
Undefined function 'helperPolarizationView' for input arguments of type 'double'.
This is a helper function for the example, so you need to open that example from MATLAB. This will copy the supporting files int...

más de 4 años hace | 0

| aceptada

Respondida
Can phased.GSCBeamformer system Object run Frame by frame?
Those beamformers do main states but currently there isn't a way to export those states. Essentially, when you first run it usin...

casi 5 años hace | 0

| aceptada

Respondida
What's the algorithm of the phased.rangeangle response
It depends on the system. In summary, if you use an FMCW waveform, you want to use FFT to do range processing. If you use a puls...

casi 5 años hace | 0

Respondida
Is ifft(fft(x).*fft(h)) faster or conv(x,h) ?
Time is not the best way to compare the two approaches. Rather, the best approach to describe is the computation complexity, i.e...

casi 5 años hace | 0

Respondida
The value returned from getNumInputsImpl method must be a constant value. But the Value is immutable
You said numInputs is nontunable, did you try to use Nontunable in the property defintion? Like properties (Nontunable) nu...

casi 5 años hace | 0

Respondida
Simulating Freespace power in Matlab
You can start with these reference pages https://www.mathworks.com/help/phased/signal-propagation.html? Go to Functions -> Sig...

casi 5 años hace | 0

Cargar más

Honglei Chen

MathWorks

Estadística

File Exchange

MATLAB Answers

MATLAB Answers

MATLAB Answers

MATLAB Answers

MATLAB Answers

Cody

Cody

Feeds