Estadística
1 Pregunta
3 Respuestas
2 Archivos
CLASIFICACIÓN
23.970
of 301.298
REPUTACIÓN
1
CONTRIBUCIONES
1 Pregunta
3 Respuestas
ACEPTACIÓN DE RESPUESTAS
0.0%
VOTOS RECIBIDOS
1
CLASIFICACIÓN
10.487 of 21.225
REPUTACIÓN
57
EVALUACIÓN MEDIA
3.00
CONTRIBUCIONES
2 Archivos
DESCARGAS
4
ALL TIME DESCARGAS
577
CLASIFICACIÓN
of 173.851
CONTRIBUCIONES
0 Problemas
0 Soluciones
PUNTUACIÓN
0
NÚMERO DE INSIGNIAS
0
CONTRIBUCIONES
0 Publicaciones
CONTRIBUCIONES
0 Público Canales
EVALUACIÓN MEDIA
CONTRIBUCIONES
0 Temas destacados
MEDIA DE ME GUSTA
Feeds
Problem with "initial conditions failed to converge" when connecting rotational to translational system
Well I kind of figured it out. I added a spring but at first the results didn't make any sense. By moving the spring into differ...
alrededor de 14 años hace | 0
Problem with "initial conditions failed to converge" when connecting rotational to translational system
Hello Guy, well I chose an angle phi of pi(rad), a translational velocity v of 0m/s, an agular velocity w of 1rad/s, a torque T...
alrededor de 14 años hace | 0
Problem with "initial conditions failed to converge" when connecting rotational to translational system
Is that the only possibility? In a simple model a high stiffness works very well, but in my more complex model I get the followi...
alrededor de 14 años hace | 0
Enviada
Problematic Model with pneumatic piston chamber
Connects translational to rotational system;initial conditions problem with pneumatic piston chamber
alrededor de 14 años hace | 3 descargas |
Pregunta
Problem with "initial conditions failed to converge" when connecting rotational to translational system
Hello, I have a problem with connecting a translational to a rotational system. Since the wheel axle doesn't fit my requirement...
alrededor de 14 años hace | 5 respuestas | 1
5
respuestasEnviada
Problematic model without pneumatic piston chamber
Model which connects a translational to a rotational system. But only works with ode 14x
alrededor de 14 años hace | 1 descarga |
