Giorgia Zucchelli
MathWorks
Followers: 0 Following: 0
Estadística
0 Preguntas
13 Respuestas
4 Archivos
CLASIFICACIÓN
3.735
of 300.338
REPUTACIÓN
14
CONTRIBUCIONES
0 Preguntas
13 Respuestas
ACEPTACIÓN DE RESPUESTAS
0.00%
VOTOS RECIBIDOS
1
CLASIFICACIÓN
398 of 20.922
REPUTACIÓN
4.115
EVALUACIÓN MEDIA
4.80
CONTRIBUCIONES
4 Archivos
DESCARGAS
16
ALL TIME DESCARGAS
40591
CLASIFICACIÓN
of 168.149
CONTRIBUCIONES
0 Problemas
0 Soluciones
PUNTUACIÓN
0
NÚMERO DE INSIGNIAS
0
CONTRIBUCIONES
0 Publicaciones
CONTRIBUCIONES
0 Público Canales
EVALUACIÓN MEDIA
CONTRIBUCIONES
0 Temas destacados
MEDIA DE ME GUSTA
Feeds
Enviada
Testbench to determine the harmonic order of a SimRF Circuit Envelope simulation
Determine the harmonic order to find the best tradeoff between simulation time and accuracy.
alrededor de 9 años hace | 1 descarga |
Enviada
RationalFittingApp
MATLAB App for rational fitting of 2 ports S-parameters.
alrededor de 9 años hace | 3 descargas |
Enviada
Fixed-Point ATAN2 using CORDIC
This demo shows how a fixed-point cordic algorithm to calculate a phase from polar coordinates (arct
alrededor de 9 años hace | 2 descargas |
Enviada
Phase Locked Loop tutorial
A tutorial showing how Phase-Locked Loops, both analog and digital can be efficiently modeling in Si
alrededor de 9 años hace | 10 descargas |
Matlab compiled code RF toolbox read function works if called from compiled script but not a compiled function
Dear Josiah, I built a very simple main function invoking the function RF_ReadTouchstone, and I managed to compile and execut...
más de 10 años hace | 0
Magnitude data of S-parameters
Hi Anna, I think I would recommend the following approach: S = sparameters('Data.s2p'); % read the touchstone file s_...
más de 10 años hace | 0
| aceptada
Getting I and Q components from square wave in simulink
Dear Muhammad, probably the easiest way to build a complex rectangular waveform is to use two signal generators (one for the ...
casi 11 años hace | 1
Delay factor in rationalfit ?
Hi, From the RF Toolbox documentation: The delay factor is a scaling factor that controls the amount of delay to fit to th...
alrededor de 11 años hace | 0
4-Port Scatter parameters to 2-Port Scatter Paremeters
Hi, The RF Toolbox documetation references this article "Mixed-Mode S-Parameter Characterization of Differential Structures" ...
alrededor de 11 años hace | 0
4-Port Scatter parameters to 2-Port Scatter Paremeters
Dear Jay, Converting S-parameters can be done, but it is not compulsory. I can imagine that you might want to do it when you ...
alrededor de 11 años hace | 0
| aceptada
How to model a reference signal in RF of radar system?
Dear Chen, in SimRF you have two modelling technologies: Equivalent Baseband and Circuit Envelope. Both technologies are suit...
más de 11 años hace | 0
phase shift with simrf
Hi, Apologies for the late reply. The SimRF phase shift block applies a rotation to the carrier frequency. For example, i...
casi 12 años hace | 0
phase shift with simrf
Hi, I assume you are referring to the phase shift block of the Circuit Envelope library in SimRF. You can find an example of ...
casi 12 años hace | 0
.amp file definition leading warning on impedance
Dear Changlin, For this type of questions I would recommend to directly contact MathWorks technical support. I will give a sh...
alrededor de 12 años hace | 0
simRF example-direct conversion receiver
Hi Yao, The direct conversion receiver demo uses two complex modulated input signals: the first is centered around 2.45GHz an...
alrededor de 12 años hace | 0
Simulink S-Parameters Plotting
Dear Mark, If you are using components from the Equivalent Baseband library, you can plot the S-parameters of the overall cas...
alrededor de 12 años hace | 0
RFToolbox - Network correctly constructed? - Matrix gets singular
Dear Lars, The problem is in the network LBC2R_Obj: it is built as a series, while I think that you wanted to have a cascade ...
casi 13 años hace | 0
| aceptada
