Pierre Giroux

pgsimulation S.E.N.C.

Last seen: 4 días hace | Con actividad desde 2012

Followers: 14 Following: 0

Mensaje

Pierre Giroux worked for over 30 years as a senior engineer at IREQ real-time simulator. His work includes design, real-time simulation, and testing of controllers for HVDC systems, FACTS controllers, and power quality devices. He also performed the design, implementation, and testing of several MATLAB/SPS models. He has wide experience in the preparation and presentation of technical seminars and training on Power and Control Systems. He is currently pursuing his activities as a consultant.

Pronouns:
He/him

Estadística

CLASIFICACIÓN
116 of 20.454

REPUTACIÓN
9.867

EVALUACIÓN MEDIA
4.90

CONTRIBUCIONES
7 Archivos

DESCARGAS
559

ALL TIME DESCARGAS
90765

Ver insignias

Feeds

Enviada

Electric Vehicle On-Board Charger
SPS models of an On-Board Charger (OBC) for Electrical Vehicle (EV).

más de 1 año hace | 106 descargas |

5.0 / 5

Enviada

Microgrid Dynamic Operation
SPS microgrid model of a Battery Energy Storage System (BESS) and a Solar Plant. Microgrid operates in grid-following or grid-f...

más de 1 año hace | 138 descargas |

4.9 / 5

Enviada

SPS Model of a Hysteresis-Based DTC Induction Motor Drive
This example demonstrates the speed regulation of a variable-speed AC drive using the Direct Torque Control (DTC) technique.

casi 5 años hace | 15 descargas |

5.0 / 5

Enviada

SimPowerSystems Model of a 1000-MW HVDC-MMC Interconnection.
This SPS simulation is optimized by using an aggregate MMC model.

alrededor de 9 años hace | 28 descargas |

5.0 / 5

Enviada

Grid-Connected PV Array
Two demonstrations of a grid-connected PV array using SimPowerSystems.

más de 12 años hace | 224 descargas |

4.6 / 5

Enviada

Loss Calculation in a 3-Phase 3-Level Inverter Using SimPowerSystems and Simscape
SimPowerSystems(SPS) and Simscape are used to calculate losses in a 3-phase, 3-level inverter.

casi 13 años hace | 25 descargas |

5.0 / 5

Enviada

Loss Calculation in a Buck Converter Using SimPowerSystems and Simscape
A SimPowerSystems model is used to calculate switching and conduction losses in a buck converter.

casi 13 años hace | 9 descargas |

5.0 / 5