photo

George

Last seen: 4 días hace |  Con actividad desde 2023

Followers: 0   Following: 0

Estadística

  • Knowledgeable Level 2
  • 3 Month Streak
  • First Answer

Ver insignias

Feeds

Ver por

Respondida
How to modify this code from MATHWORKS website?
Hello Basmah, There are a couple of things that you will need to change in order to get this example working with the phase cod...

2 meses hace | 0

Respondida
Interpolating Phased Array Toolbox patterns
Another thing to consider is that pattern also accepts optional azimuth and elevation angle input arguments: Plot array pattern...

6 meses hace | 1

Respondida
How can I develop a matlab code that used to fine the phase profile of a Reconfigurable intelligent surface? with contains a beamforming algorithm to locate the received wave
Take a look at this documentation page regarding simulating a RIS in Matlab: Introduction to Reconfigurable Intelligent Surface...

6 meses hace | 0

Respondida
How can I implement phased.freespace channel model outside matlab with moving target?
In addition to implementing this yourself, you could consider generating C/C++ code to deploy onto a real time system. All of th...

6 meses hace | 0

Respondida
Steer different subarrays in different directions or phase for constructive interference of beams from each subarray
Hello, I recommend you take a look at the ReplicatedSubarray object: Phased array formed by replicated subarrays - MATLAB (math...

8 meses hace | 0

Respondida
FMCW radar range estimation differences between phased.RangeResponse and fft
The main reason why you are see differences is because of the "RangeWindow" being set to Hann in the RangeResponse but not apply...

9 meses hace | 0

| aceptada

Respondida
How to modify FPGA-Based Beamforming in Simulink: Algorithm Design
Hello, As far as changing the example to work with 5 elements, it looks like the data for the example gets initialized in a c...

9 meses hace | 0

| aceptada

Respondida
How to use MVDREstimator2D with real acoustic signals received by rectangle Microphone array ?
Hello, I am not sure what your final goal is with this analysis, because you are using the MVDREstimator2D, I assume that you w...

10 meses hace | 0

| aceptada

Respondida
Up Conversion and Down Conversion in Phased Array Toolbox
Hi Waseem, you just need to input your baseband signal to the radiator object. If you look at the phased.Radiator object, you w...

10 meses hace | 0

| aceptada

Respondida
want to create phased array antenna as shown in picture
You can use a phased.ConformalArray to represent an array with arbitrary element positioning - https://www.mathworks.com/help/ph...

11 meses hace | 0

Respondida
How to apply MVDR to real signal?
Hi Marko, It looks like the simulation code that you posted is assuming that the input to the WidebandCollector is modulated, b...

12 meses hace | 0

Respondida
why am i getting the complex values after applying the phased.Freespace object to the rectangular waveform ouput
Hi Ijjada, To answer your questions: 1) You can use the phased.Collector to measure the phase of a signal in each antenna in a...

12 meses hace | 0

Respondida
What are the transmission side beamformer objects, that can be used for transmission side weights calculation and signal determination ?
Hi Rochelle, I would recommend taking a look at this documentation page: https://www.mathworks.com/help/phased/beamforming.htm...

12 meses hace | 0

| aceptada