Respondida
VIDEO ON MODELLING OF LI-ION 1 RC BRANCH WITH INTERNAL HEATING AND TEMPERATURE
Hi Sudeep, Do you need to create this block from scratch? If not, there are shipping blocks that do the same thing as you descr...

más de 2 años hace | 0

| aceptada

Respondida
Trying to get it to the following passive cell balacing to run but unable to. Can I get help?
Hi Jayden, I looked at your model. It seems that the solver is stuck at about 4.6 sec. I suggest that you try different types o...

más de 2 años hace | 0

Respondida
Output of the battery is wrong
Hi Raghav, It is understood that you expect the voltage of 11 parallel assemblies connected in sereries to be around 45 V. The ...

más de 2 años hace | 0

Respondida
Battery SOC is showing 0 reading in scope while discharging
Hi Armaghan, The SOC physical signal from the Battery (Table-Based) block goes through PS-Simulink Converter before it become...

más de 2 años hace | 0

Respondida
Battery builder app error
Hi Kartik, Since you are building toward a module, there is no need to specify cell balancing strategy on the parallel assem...

más de 2 años hace | 0

| aceptada

Respondida
Seeking guidance on series/parallel grouping implementation in Simscape for efficient modeling of complex systems
Hi Rushikesh, vCell in the generated battery pack block is meant for cell level voltage. Therefore, it is 4V instead of 44V. P...

más de 2 años hace | 0

Respondida
how to output capacity degradation curve based on simscape battery (table-based) block
Hi Boran, The Battery (Table-Based) block is designed in a way that the aged and faded capacity is not accessible outside of t...

más de 2 años hace | 0

Respondida
How to find battery self-discharge resistance
Hi there, If there is a known self-discharge rate, e.g., 1% self discharge per month, the self discharge current [A] can then b...

alrededor de 3 años hace | 0

Respondida
simscape/simplified pmsm and drive. how to build electrical loss?怎么设置电气损失？
Hi Yuyang, The underlying assumption is that the electrical loss is a function of speed and torque. E(w,T) is essentially a 2-D...

alrededor de 3 años hace | 0

Respondida
Electrical load forecasting methods
Hi Adnan, To train a model based on time series data for forcasting purpose, one option is to consider long short-term memory ...

alrededor de 3 años hace | 0

Respondida
I´d like to simulate a delta three phase system with balanced loads using simscape foundation library ac voltage sources I have a refernece issue though, any help?
Hi Jose, For modeling three phases systems with balanced delta load, we highly recommend Simscape Electrical, which has existin...

más de 3 años hace | 0

Respondida
How to create Battery (Table-Based, Instrumented) with Thermal Port through MATLAB script
Hi Owain, Try the following: add_block( 'ee_lib/Sources/Battery (Table-Based)','test_model/batt_cell_block'); set_param('tes...

más de 3 años hace | 0

Respondida
How to discharge a battery onto a load with constant voltage/current while battery output voltage decreases.
Hi Cathal, To maintain a constant discharge power from the battery, it would be necessary to increase discharge current progres...

más de 3 años hace | 0

Respondida
Current measurement and voltage measurement
Hi Hitesh, Voltage sensor and current sensor are Simscape blocks and they work with physical signals, whereas current measureme...

más de 3 años hace | 0

Respondida
How i can find the relationship between Fuel cell efficiency and power on Simulink. ( i am using the Fuel cell stack component provided by simulink).
Hi Giorgos, A starting point would be to use a Controlled Current Source with a Simulink-PS Converter to create a variable load...

más de 3 años hace | 0