photo

Adeline


Con actividad desde 2023

Followers: 0   Following: 0

Estadística

  • Knowledgeable Level 1
  • 3 Month Streak
  • First Answer

Ver insignias

Feeds

Ver por

Respondida
使用matlab提供的SAR ADC模块，idea adc和analog adc用ac testbench跑出来的参数一模一样
你好， 我将用英语回答。 I understand you are trying to simulate the example “Design and Evaluate Successive Approximation ADC Using...

más de 1 año hace | 1

Respondida
loosing nano 33 iot configuration when disconnecting usb cable or reseting
Hi, I understand you are trying to connect an Arduino Nano 33 IoT board with MATLAB over WiFi. If you manually disconne...

más de 1 año hace | 0

Respondida
Could not open VISA object via eternet
Hi, I understand you are trying to connect a Tektronix DP077002SX oscilloscope in MATLAB via Ethernet. The error using “fopen”...

más de 1 año hace | 0

| aceptada

Respondida
Asynchronous machine SI unit output to inverter?
Hi, I understand you are trying to model a generator in Simulink to analyse its power generation. The Simscape library contai...

más de 1 año hace | 0

Respondida
Are multiple simulation plots (using the Multiple Simulations panel) configurable, and when does the measurement take place?
Hi, I understand you are using the “Multiple Simulations” panel to analyse a 3-phase uncontrolled rectifier model in Simulink. ...

más de 1 año hace | 0

Respondida
No annotation outputted when using imageLabeler
Hi, I understand you are using the “imageLabeler” tool to create annotations for images and ultimately export them into COCO fo...

más de 1 año hace | 0

Respondida
Sending UDP data from my Simulink model in External Mode while bypassing the target hardware
Hi, I understand you are trying to run a Simulink model with a UDP communication block in external mode. The external mode si...

más de 1 año hace | 0

Respondida
Can the stepper motor with stepper driver be used in a Simscape Multibody model?
Hi, Thank you for sharing reference images of the model. I understand you are trying to execute a Simscape Multibody model whi...

más de 1 año hace | 0

Respondida
Why does my simscape component have an error?
Hi, I understand you are trying to execute a Simulink model which includes a customized non-linear capacitor. The model attache...

más de 1 año hace | 0

Respondida
Gerschgorin circles: intersection of union of circles
I understand you are trying to execute a program to create the Gerschgorin's Circle for the example matrix A. The mentioned c...

más de 1 año hace | 0

Respondida
nrPolarDecode - Transmit and Decode Polar Encoded Data example
I understand that you are trying to execute the “nrPolarDecode” example in https://www.mathworks.com/help/5g/ref/nrpolardecode.h...

más de 1 año hace | 0

Respondida
"stacked" polar plot
I understand that you are trying to plot a wind rose diagram with your data of speed and angle. You want the data to be binned b...

más de 1 año hace | 1

Respondida
Linear array of cross polarized yagi-uda antennas
I understand that you are trying to generate the radiation pattern of an antenna system which consists of two cross polarized ya...

más de 1 año hace | 0

Respondida
Rotation of radiation pattern
I understand that you are trying to rotate the radiation pattern of an antenna defined in the Antenna Toolbox. You probably trie...

más de 1 año hace | 0

Respondida
Numerator frac. length in Filter Designer
The filter coefficients calculated by MATLAB Filter Designer are specified in base 10. To have only four decimal places you can ...

más de 1 año hace | 0

Respondida
Set properties of a COM-server that take an argument
You can change the property values by assigning the existing values to a handle and updating the property values through it. Fo...

más de 1 año hace | 0