photo

Jon Boerner

MathWorks

Con actividad desde 2012

Followers: 0   Following: 0

Mensaje

Estadística

All
  • Knowledgeable Level 3
  • Knowledgeable Level 2
  • First Answer
  • Solver

Ver insignias

Feeds

Ver por

Respondida
Simulink Real Time are the benchmark results acceptable?
You might want to take a look at this link, and see if anything is relevant: <http://www.mathworks.com/matlabcentral/answers/...

alrededor de 10 años hace | 0

| aceptada

Respondida
Link Simulink Design Verifier Report to different model file?
I do not believe there is a way to do that via any options anywhere. It might be easiest to just find/replace instances of the t...

alrededor de 10 años hace | 0

| aceptada

Respondida
Linux UDP Send block fails to send to broadcast address
Did you happen to try setting the IP Address value in the block to '127.0.0.1'? The dialog says "'255.255.255.255' for broadcast...

alrededor de 10 años hace | 0

Respondida
Is it possible to modify the matrices in a genss ?
I don't know if you can change the size, but I think you could create some more tunable parameters to fill B, but make sure they...

alrededor de 10 años hace | 0

| aceptada

Respondida
Program NXT to write/draw in MATLAB
This is a pretty open-ended question that does not have a straightforward answer. The short answer is that you will probably wan...

alrededor de 10 años hace | 0

Respondida
Help with balancing GyroBoy (Lego Mindstorms EV3) using MATLAB
Hi Mohammad, When you say you have programmed the PID controller, using MATLAB, what exactly do you mean? Are you still using...

alrededor de 10 años hace | 0

Respondida
Rotations of simulink 3D animation do not correspond to mates in Solidworks assembly
Two things: # If the model appears correctly in the SimMechanics Viewer, I would recommend trying to use the STL files you us...

alrededor de 10 años hace | 0

Respondida
How to enable External Mode for a Simulink model containing multiple referred models?
In R2014b, there is not a way to convert model blocks into subsystems. You could potentially write a script to do this, but it w...

alrededor de 10 años hace | 0

Respondida
Error installung Peak CAN Support Package
The first error looks like it may have caused the second. And the first error looks like a permissions issue. Maybe try starting...

alrededor de 10 años hace | 0

Respondida
Job management, control flow
Hi Benjamin, The easiest way to do this is probably using either the |<http://www.mathworks.com/help/distcomp/batch.html batc...

alrededor de 10 años hace | 1

| aceptada

Respondida
Analysis of generated code
It looks like your model is not attached to the question, but here is my best guess at what is happening. You refer to the r...

alrededor de 10 años hace | 0

Respondida
How do you get Signal Builder to import a mat file it exported?
When you export data from the Signal Builder in R2011b, it exports it as a structure with all kinds of Signal Builder-specific i...

alrededor de 10 años hace | 0

| aceptada

Respondida
Simulink code interface to external C++ application
Hi Anup, I think that the exact behavior you are looking for may be limited to the Embedded Coder product. For Simulink Co...

alrededor de 10 años hace | 0

| aceptada

Respondida
Changing the order of stateflow outputs (inputs)
If you open the model explorer for your model, and navigate to the Stateflow chart, you should see all of your inputs and output...

alrededor de 10 años hace | 2

| aceptada

Respondida
converting matlab code into simulink
In the mask for the Discrete FIR Filter in Simulink, there is an option to specify the initial states: <</matlabcentral/answe...

alrededor de 10 años hace | 0

Respondida
Cannot connect arduino uno to Matlab
The error you are seeing is related to how MATLAB stores and displays its error messages. If you run the following command, w...

alrededor de 10 años hace | 0

| aceptada

Respondida
About code génération in Matlab 2014b
You are correct that the file will not be anywhere in your MATLAB installation. That file is actually created during the code ge...

alrededor de 10 años hace | 0

Respondida
How can I call a function in simulink that is defined in one of the source file in the Custom Code of the Code generation pane ?
There are a couple options for calling a custom function from your model. The first is to use a MATLAB function block. In a ...

alrededor de 10 años hace | 0

Respondida
Unseeded random noise in Simulink
You cannot remove the seed option, but you can use a random seed. For example: <</matlabcentral/answers/uploaded_files/1957...

alrededor de 10 años hace | 1

| aceptada

Respondida
Extra dimension on simulink output
This third dimension corresponds to time. |tout| lets you map the output matrix to certain times in the simulation. For example,...

alrededor de 10 años hace | 0

| aceptada

Respondida
Does Matlab support bed, wig, and other usual genomics file formats?
I took a quick look through the documentation, and was not able to find anything about those file types. The pages that describe...

alrededor de 10 años hace | 1

| aceptada

Respondida
-maxNumCompThreads, hyperthreading, and parpool
Based on my understanding of how MATLAB uses cores/threads, your descriptions of what you can/cannot do are all spot on. <http:/...

alrededor de 10 años hace | 0

Respondida
Error: A part name shall not have a forward slash as a last character [M1.5]
To start, SLX files are just ZIP files with a particular set of files and using a particular compression method. Looking arou...

alrededor de 10 años hace | 1

| aceptada