Patrick

Last seen: 23 días hace | Con actividad desde 2025

Followers: 0 Following: 0

Respondida
Building and Embedding a Reduced Order Model in National Instruments Hardware (cRIO)
Hi Umar, Yifeng, Many thanks for taking the time to answer my question. I have build some initial transfer function, surface ...

alrededor de 2 meses hace | 0

Pregunta

Building and Embedding a Reduced Order Model in National Instruments Hardware (cRIO)
Hi All, I could do with some guidance on a task required on an National Instruments (NI) LEM controller currently under build...

alrededor de 2 meses hace | 3 respuestas | 0

respuestas

Pregunta

Simscape: Constraining Translational Network with Slider Crank Block
Hi, I am building a Simscape digital twin of a twin-cylinder opposed-piston engine. I am unsure if my basic block configuration...

2 meses hace | 0 respuestas | 0

respuestas

Pregunta

PMLSM FOC Control: Chopper Resistor and PWM Control
Hi All, Quick question. I am modelling an FOC PMLSM drive model. I need to add a chopper resistor and switch (ideal semiconduc...

5 meses hace | 1 respuesta | 0

respuesta

Pregunta

Resetting a Simscape Slider-Crank Angular Position Signal to a 0 Value with a Trigger Signal.
Hi All, Forgive me if this topic of signal resetting in Simscape has been ask and solved countless times before. However, I am ...

6 meses hace | 0 respuestas | 0

respuestas

Respondida
Simscape PMSM: WYE Connected Capacitor Bank with Resistive Load
Hi, I have modified the Simscape blocks to describe the WYE-Connected capacitor bank with resistive load. The phase waveforms a...

8 meses hace | 0

Pregunta

Simscape PMSM: WYE Connected Capacitor Bank with Resistive Load
Hi, I am Simulating a PMSM with a WYE Connected Capacitor Bank (2mH) with Resistive Load (1 Ohms each phase). This is for power...

8 meses hace | 1 respuesta | 0

respuesta