Maximilian

Milwaukee School of Engineering

Con actividad desde 2013

Followers: 0 Following: 0

Mensaje

Professional Interests: Control systems, Model Based Systems Engineering, hydraulics

Estadística

Ver insignias

Feeds

Respondida
orientation of imported models
Probably the proper way would be to change the orientation in Creo and re-export it. Otherwise you can reorient the transforms t...

alrededor de 11 años hace | 1

| aceptada

Respondida
Multiple Joints to connect solid blocks?
You would need to add four transforms to the bodies that specify the location of the springs in order to have the additional con...

alrededor de 11 años hace | 1

Respondida
Force-Torque-Sensor für SimMechanics Second Generation
SimMechanics 2nd gen has sensors built into the joints. For example if you open the parameters for a revolute joint there is a s...

alrededor de 11 años hace | 1

Respondida
How can I create a Rolling Ball in SimMechanics?
I don't believe there is a way to truly represent rolling of a ball, but you may want to check out the rack and pinion constrain...

alrededor de 11 años hace | 1

Respondida
A unit step input with unity feedback using MATLAB Simulink ?
Connect a step input to a summing junction, put your transfer function in a Transfer Fcn block, add your feedback and connect th...

más de 11 años hace | 1

Respondida
Controlling an Input signal?
The signal builder block may be what you need. <http://www.mathworks.com/help/simulink/slref/signalbuilder.html Signal Builder>

más de 11 años hace | 0

Respondida
Simulink: Subsystem vs Model Referencing
If you will not be changing the content of the blocks (other than the parameters) and do not need to perform unit testing it may...

más de 11 años hace | 0

Respondida
Simulink error: Unable to determine a fixed step size based on the sample times in the model
I believe that this issue is caused by having the "auto" setting for your fixed step size. When using auto, the solver looks for...

más de 11 años hace | 2

| aceptada

Respondida
Custom block libraries in Simulink: pre-compilation action
I am not how to make simulink warn you but perhaps you could try writing a short script that will automatically connect the bloc...

más de 11 años hace | 0

Respondida
Hydraulic Pressure Sensor making flow rate zero (0) in SimHydraulics. What is the workaround?
This may be caused by putting the pressure sensor in series with your hydraulic component. If you connect a line to A it will no...

más de 11 años hace | 3

| aceptada

Pregunta

Problems Importing CAD model to Simulink 3D Animation
Hello, I am working with Simulink 3D animation and am attempting to bring in a CAD model from Solidworks but am having issues...

más de 11 años hace | 1 respuesta | 0

1

respuesta

Pregunta

Error when running SimMechanics model on Arduino Mega 2560
Hello, I am trying to run a Simmechanics model on an Arduino Mega 2560 however I get the following error message: The call to...

casi 12 años hace | 0 respuestas | 0

0

respuestas

Respondida
Implementing model references with SimMechanics and SimHydraulics
Thanks for the prompt reply. I currently have subsystems implemented, however it would be preferred if there was a way to indepe...

casi 12 años hace | 0

Pregunta

Implementing model references with SimMechanics and SimHydraulics
Hello Is there a way to use Simulink model referencing to reference a SimMechanics model that contains Body CS ports and gene...

casi 12 años hace | 3 respuestas | 0

3

respuestas