Murat Belge

Last seen: Today

MathWorks

97 total contributions since 2012

Murat Belge's Badges

Answered
codertarget.createDriverProject('my_driver') problem
Use the attached function archive, my_driver.ZIP, which contains the necessary files to follow the tutorial. The archive represe...

más de 2 años ago | 0

Submitted

Code for Article "Run MATLAB Image Processing Algorithms on Raspberry Pi and NVIDIA Jetson"
The MATLAB® code, images and CUDA® code referenced in the technical article.

alrededor de 3 años ago | 7 downloads |

Answered
putFile command is not working
This works fine for me. Can you execute the following commands an post the results: >> a = dir('output.txt'); >> disp(a)...

más de 5 años ago | 0

Answered
When I use the embedded coder and the HW-Support-Package to put a Simulink model on my Raspberry Pi, is the code compiled on the Pi or is it cross compiled on my PC an then transferred to the Pi?
The code is generated on the host computer and compiled on the Raspberry Pi. There is no cross-compiling.

más de 5 años ago | 1

Answered
Raspberry Pi Wget download problem
Can you download "http://www.mathworks.com/supportpackages/wget_for_windows/wget.exe" directly using a web browser (Chrome or In...

alrededor de 6 años ago | 0

Answered
Im using MATLAB R2014b , having trouble with hardware support install for raspberry pi, it says the following while installing the support ........
Can you execute the following commands on the MATLAB command line and post the results: >>h = raspi.setup.RaspberryPiFirmwa...

alrededor de 6 años ago | 0

Answered
When i tried to run my simulink on target hadware The following error is coming.The harware i m using is Raspberry Pi.. Can any knows answer?
There are blocks that use continuous time in your Simulink model. Eliminate these blocks from your model. To see the blocks usin...

alrededor de 6 años ago | 0

Answered
Loop Raspi Camera board to continuously take picture
Take a look at the example "Tracking a Green Ball" that comes with the Raspberry Pi support package.

alrededor de 6 años ago | 0

| accepted

Answered
Matlab support for Raspberry Pi under Mac OS X?
MATLAB support package for Raspberry Pi Hardware does not support MAC OS-X in R2014a release. The support for MAC OS-X has been ...

alrededor de 6 años ago | 0

| accepted

Answered
I can't write a Raspbian image to certain SD cards using the Raspberry Pi support package
Start MATLAB using "Run as administrator". Right click on the MATLAB icon and choose "Run as administrator" in the popup menu. T...

alrededor de 6 años ago | 3

Answered
I tried connecting the Raspberry Pi to my laptop. It says host not found with this error.
Find out the IP address of your Raspberry Pi and try connecting using the IP address instead of the host name. First ping on the...

alrededor de 6 años ago | 0

Answered
Problem trying to install raspberry support package
Can you download http://www.mathworks.com/supportpackages/wget_for_windows/wget.exe directly using a browser?

alrededor de 6 años ago | 0

Answered
Raspberry Pi Wget download problem
Mark: We have updated the link for wget.exe on 3/18/2015. The link for download address now is "http://www.mathworks.com/support...

alrededor de 6 años ago | 0

Answered
How to access live video from any browser through MATLAB?
The MATLAB Support Package for Raspberry Pi Hardware provides an interface to the Raspberry Pi camera module. Here is an example...

alrededor de 6 años ago | 0

Answered
Acessing already OS installed raspberry pi using matlab
The raspi MATLAB interface requires a server running on the Raspberry Pi hardware. This is a custom server that interprets comma...

alrededor de 6 años ago | 0

| accepted

Answered
Cannot download http://www.mathworks.com/supportpackages/wget_for_windows/wget.exe
This issue was caused by the web site containing wget.exe being taken down. We updated the links to wget.exe. You should be able...

alrededor de 6 años ago | 1

| accepted

Answered
Add line to make file generated by simuliunk in external mode for raspberry pi
If you want to add a: * Source file * Header file * Linker flag unconditionally in your Simulink model, you can add an I...

alrededor de 6 años ago | 0

Answered
Add line to make file generated by simuliunk in external mode for raspberry pi
I am assuming you are developing a Simulink block that uses the wiringPi library. If you develop your block as a System object, ...

alrededor de 6 años ago | 0

Answered
UDP communication Raspberry pi with direct Ethernet connection
Did you try using your computer's IP address instead of using the broadcast IP address of '255.255.255.255'?

más de 6 años ago | 0

Answered
Raspberry Pi connection error in a different work station
I assume you chose direct connection option for network configuration. To connect to your Raspberry Pi using a different compute...

más de 6 años ago | 0

Answered
Can I generate AC voltage in usb port ??
No. You cannot use a USB port to generate an AC voltage.

más de 6 años ago | 0

Answered
Use Simulink or Matlab Code on Raspberry Pi via Mac?
We are working on Mac and Linux versions of this support package. We'll be releasing those once they are fully completed.

más de 6 años ago | 0

Answered
"index exceeds matrix dimensions" when I connect my Raspberry Pi model B to Matlab2013b.
Robert: You can install MATLAB Support Package for Raspberry Pi without the Simulink Support package. Just uncheck Simulink s...

más de 6 años ago | 0

Answered
need to convert RPi video output to one multidimentional input from Raspberrypi video capture block.
Use reshape block.

más de 6 años ago | 0

Answered
Problem in running simulink model on Raspberry Pi B+
You host computer is not seeing devices in the IP address range 192.168.1.xx. The message you are getting "No route to host" is ...

más de 6 años ago | 0

Answered
why i have this error when i try to start my connection with raspberry pi?
There is no SSH server running on 192.168.1.2 and the target machine is refusing SSH connection request from MATLAB. 1. Logi...

más de 6 años ago | 0

| accepted

Answered
High latency for audio use on a Raspberry Pi using Simulink
The ALSA Audio Playback block uses and audio buffer size of 0.5 seconds of data. You can not change this parameter unless you mo...

más de 6 años ago | 0

Answered
Why cannot data be written to a file on Raspberry pi when it is working standalone, i.e when executable, created with the use of simulink, on raspberry pi is run
The To File block does not generate any code (i.e. a no-op block) when the Simulink model is run as a stand-alone application. T...

más de 6 años ago | 2

| accepted

Answered
can i run and directly modify a simulink model on a beaglebone black that is connected via wifi?
Assuming you have installed the Embedded Coder Support Package for BeagleBone Black hardware, yes. Simulink requires a TCP/IP co...

más de 6 años ago | 0

Answered
How can I generate code for Raspberry Pi without the device connected?
Generating code for Raspberry Pi without a connection to the board is not possible. The Raspberry Pi support package uses the co...

más de 6 años ago | 0

| accepted