photo

Surojit Sen


Con actividad desde 2016

Followers: 0   Following: 0

Estadística

  • Thankful Level 1

Ver insignias

Feeds

Ver por

Pregunta


Freewheeling diode causing error in Full-Bridge Inverter model
Hi, please see the attached Simulink model. Its a simple full-bridge inverter producing quasi-square alternating voltage at the ...

más de 7 años hace | 0 respuestas | 0

0

respuestas

Pregunta


How to dynamically change a block parameter value during simulation run-time?
I have been trying to find an easy way of doing this, but have failed till now. The problem is like this: I want to implement a ...

más de 7 años hace | 1 respuesta | 0

1

respuesta

Pregunta


What Simulink tool should I use to break a continuous signal into its frequency components?
I have a continuous signal which is composed of multiple frequency components, not necessarily harmonics. How do I separate this...

más de 7 años hace | 1 respuesta | 0

1

respuesta

Pregunta


'Degenerate Mass on Follower Side' issues?
[Please refer to the screenshots, as the portal does not allow attaching Simulink (.slx) models here] *** EDIT MADE TO QUESTION:...

alrededor de 8 años hace | 0 respuestas | 0

0

respuestas

Respondida
Can a joint produce 'Sensing' outputs resolved in the follower frame?
Got the answer after a bit of scouring the library, simply use a 'Transform Sensor' in parallel to the joint, and output whateve...

alrededor de 8 años hace | 0

Pregunta


Can a joint produce 'Sensing' outputs resolved in the follower frame?
Take for example the planar joint, can I get the position, velocity, acceleration of the follower frame resolved in the follower...

alrededor de 8 años hace | 1 respuesta | 0

1

respuesta

Pregunta


Pacejka Tire Model (Magic Formula) for lateral dynamics?
The Magic Formula block in Driveline is excellent, but only caters to the longitudinal forces/acceleration of the tire. I unders...

alrededor de 8 años hace | 2 respuestas | 0

2

respuestas

Pregunta


How do I set block parameter value using a Mask property?
I want to convert a Suspension block subset into a generic suspension Mask. This mask would have a few popups. A particular bloc...

alrededor de 8 años hace | 1 respuesta | 0

1

respuesta