photo

Mir Lodro


Last seen: más de 3 años hace |  Con actividad desde 2017

Followers: 0   Following: 0

Mensaje

Research Fellow
George Green Institute for Electromagnetics Research-GGIEMR

Estadística

  • Revival Level 1
  • First Review
  • First Answer

Ver insignias

Feeds

Ver por

Respondida
USRP B210 under and overflow
You need to comment out or reduce the number of visualisers in your baseband model. In addition to that you must concentrate on ...

alrededor de 4 años hace | 0

Respondida
How can i transmit image with OFDM and Receive the same image with OFDM with Pluto ?
I used this example with my PlutoSDR and I had no trouble transmitting and receiving image. I used Ubuntu 18.04 with MATLAB 2020...

más de 4 años hace | 0

Respondida
Receiving garbage in USRP QPSK example
You should reduce the gain of the Tx USRP or increase the distance between two USRPs. You could also use ethernet to USB convert...

más de 4 años hace | 1

Respondida
How long can "post installation tasks" last?
Have you please resolved this. I am having same issue stuck at post installation process. I am using MacOS Catalina 10.15.6.

más de 4 años hace | 0

Pregunta


Why Simulink/MATLAB crashes when configured for multi-user transmit beamforming with two X310 USRPs?
Hi, I am using two X310 USRPs to be configured as bundled radio. I have successfully done 2x2 MIMO with two X310 USRPs connect...

más de 4 años hace | 0 respuestas | 0

0

respuestas

Pregunta


How to plot repeated sequence in a file using stem3 command?
Hi, I want to extract repeated channel response measurement from a file using loop and I want to plot using stem3 function. Ca...

más de 5 años hace | 1 respuesta | 0

1

respuesta

Respondida
How to plot data sequences from multiple files in a loop?
Thanks, i solved the problem.

casi 6 años hace | 0

Pregunta


How to plot data sequences from multiple files in a loop?
Hi, I have 10 txt data files and I want to plot data from each file after performing opertations on 3D plot. I have given a wi...

casi 6 años hace | 2 respuestas | 0

2

respuestas

Respondida
PCIe support for USRP X310 with Simulink/MATLAB 2017(a)
Does the hardware support package for USRP within MATLAB 2016(a) support the PCIe interface for USRP X310? I have installed PCI...

más de 7 años hace | 0

Respondida
Way around to use USRP X310 with latest UHD or with UHD 3.8.2 in Matlab 2015b ?
I have installed PCIe 10GigE to work with USRP x310 and use Simulink for model development. The USRP x310 works fine with 1GigE ...

más de 7 años hace | 0

Pregunta


How to QPSK modulate a video signal in Simulink?
I intend to develop communication system in Simulink where I want to transmit video signal over the air. The traditional help is...

más de 7 años hace | 0 respuestas | 0

0

respuestas