when i write data to things speak using arduino mkr1000 i sent the data to thingspeak but every time to start data transmission i need to run serial monitor in arduino code.

iam attaching the code here and once after uploading the code to arduino and i started serial monitor the values are displayed in thingsspeak but once i try to connect it to a battery /unplug and plug it, i need to again run the serial monitor to view the data in thingsspeak. i would like to use a battery as power supply after uploading the code to arduino.

/*

WriteSingleField

Description: Writes a value to a channel on ThingSpeak every 20 seconds.

Hardware: Arduino MKR1000

!!! IMPORTANT - Modify the secrets.h file for this project with your network connection and ThingSpeak channel details. !!!

Note:

- Requires WiFi101 library version 0.15.3 or newer.

- This example is written for a network using WPA encryption. For WEP or WPA, change the WiFi.begin() call accordingly.

ThingSpeak ( https://www.thingspeak.com ) is an analytic IoT platform service that allows you to aggregate, visualize, and

analyze live data streams in the cloud. Visit https://www.thingspeak.com to sign up for a free account and create a channel.

Documentation for the ThingSpeak Communication Library for Arduino is in the README.md folder where the library was installed.

See https://www.mathworks.com/help/thingspeak/index.html for the full ThingSpeak documentation.

For licensing information, see the accompanying license file.

Copyright 2020, The MathWorks, Inc.

*/

#include <WiFi101.h>

#include "secrets.h"

#include "ThingSpeak.h" // always include thingspeak header file after other header files and custom macros

char ssid[] = SECRET_SSID; // your network SSID (name)

char pass[] = SECRET_PASS; // your network password

int keyIndex = 0; // your network key Index number (needed only for WEP)

WiFiClient client;

unsigned long myChannelNumber = SECRET_CH_ID;

const char * myWriteAPIKey = SECRET_WRITE_APIKEY;

int number = 0;

#define sensorPin A1

void setup() {

Serial.begin(9600); // Initialize serial

while (!Serial) {

; // wait for serial port to connect. Needed for Leonardo native USB port only

}

ThingSpeak.begin(client); // Initialize ThingSpeak

}

void loop() {

// Connect or reconnect to WiFi

if(WiFi.status() != WL_CONNECTED){

Serial.print("Attempting to connect to SSID: ");

Serial.println(SECRET_SSID);

while(WiFi.status() != WL_CONNECTED){

WiFi.begin(ssid, pass); // Connect to WPA/WPA2 network. Change this line if using open or WEP network

Serial.print(".");

delay(1000);

}

Serial.println("\nConnected.");

}

int reading = analogRead(sensorPin);

// Convert the reading into voltage:

float voltage = reading * (5000 / 1024.0);

// Convert the voltage into the temperature in degree Celsius:

float temp = voltage / 100;

// Print the temperature in the Serial Monitor:

//Serial.print(temp);

//Serial.print(" \xC2\xB0"); // shows degree symbol

//Serial.println("C");

// Write to ThingSpeak. There are up to 8 fields in a channel, allowing you to store up to 8 different

// pieces of information in a channel. Here, we write to field 1.

int x = ThingSpeak.writeField(myChannelNumber, 1, temp, myWriteAPIKey);

if(x == 200){

Serial.println("Channel update successful.");

}

else{

Serial.println("Problem updating channel. HTTP error code " + String(x));

}

// change the value

number++;

if(number > 99){

number = 0;

}

delay(20000); // Wait 20 seconds to update the channel again

}