How to merge two bus signals ?

I designed two bus signals with the same data type.

One signal is the initializing signal.

The other is a signal that is checked every cycle.

A merge block was used to merge two signals, but the following error occurred.

***************************************************************************************************************************************************************

Cannot propagate non-bus signal from 'Output Port 1' of 'AppSelfTest/P_u32_s_APP_CST_RetryLimitsReachedStatus_DE_merge' to 'Input Port 1' of 'AppSelfTest/P_u32_s_APP_CST_RetryLimitsReachedStatus_DE' because the destination block requires a bus signal.

***************************************************************************************************************************************************************

Is there any way to solve this issue?

[Saurabh]

Hi

It is my understanding that the output from merge block is expected to be a bus signal but in reality, it is coming out to be non-bus signal which is causing the given error. I would request you to provide the simulink model or describe the steps to reproduce the error. Besides, please make sure that you are following all the guidelines mentioned in the merge block documentation .

Hope it helps!

[WJKIM]

Hi

I kept trying to solve this problem.

I found this cause and solved it.

The cause is that the signal name of two tags in bus creator block was different.

Thanks for your interest!

[Saurabh]

Hi, glad to hear that you solved the problem.