Problem to use DSP F28035 with Simulink

Hi,

I hope everything is okay.

I have been working with the dsp f28035x,adjunt the link of it https://www.ti.com/tool/TMDSCNCD28035ISO, but i haven't been able to connect with simulink. The script of simulink is just a constant and DO of the library C2000. I have to mention that I already installed ccs v10 and the control suite which are necessary in order to work with simulink and DSP. I am gonna attach the configuration of the hardware, the error, the script and the target with its docking.

I would like to know why I am having this problem, I have done my own research but I couldn't fine a solution. I don't know if I have a mistake with physical switches or with some configuration in Simulink

I am looking forward to hearing your answer.

Thanks in advance

Answer 1

[Asim]

Hello Miguel,

I have encountered similar issues while working with TI boards. The error you're experiencing is typically linked to a variety of hardware or firmware issues that can hinder the JTAG debugger from establishing a connection with the core. Please refer to the following link for guidance on troubleshooting this error.

https://software-dl.ti.com/ccs/esd/documents/ccsv7_debugging_jtag_connectivity_issues.html#c28x-the-debug-probe-reported-an-error

I hope this helps!

Best Regards,

Asim Asrar