Problem with Simscape Onramp
69 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Joydeep
el 26 de Sept. de 2022
Respondida: NABIL
el 18 de Mzo. de 2024
Hello!
I'm trying to access the Simscape Onramp course in browser mode and the Simulink window refuses to open even after waiting for a long time.
The one time it did open, it showed an error when clicking on Submit for the very first assignment.
"Unrecognized function or variable 'simmechanics.sli.internal.register_datatypes'. (Figure atached)
Thanks!
3 comentarios
Sanaullah-ghous
el 23 de Dic. de 2023
Unrecognized function or variable 'simmechanics.sli.internal.register_datatypes'.
jay
el 13 de Feb. de 2024
=== Analysis (Elapsed: 0.66 sec) ===
Error:Unrecognized function or variable 'simmechanics.sli.internal.register_datatypes'.
Respuesta aceptada
Kannan
el 29 de Sept. de 2022
Hi Joydeep,
- Coming to the problem of accessing the Simscape Onramp, Please ensure that your version of MATLAB is R2021a or later before proceeding. This can be confirmed by typing in >> ver at the MATLAB command line.
- You can choose to download the latest version if you have a licence or request for a free trial here : https://www.mathworks.com/campaigns/products/trials.html .
- When on a trial licence please acccess onramp courses from your MATLAB desktop application. Here are the steps to access Simscape Onramp from the MATLAB Command Window:
- Open MATLAB, and ensure that you are logged into your account. Check the upper right corner to verify that you are signed in.
- Type the command below in the Command Window:
learning.simulink.launchOnramp('simscape')
Now coming to the error message Undefined function or variable 'simmechanics.sli.internal.register_datatypes'. The root cause of this issue is under investigation. The workaround is to execute the following command from MATLAB Online.
>> addpath(fullfile(matlabroot,'toolbox/physmod/sm/sli/m'))
6 comentarios
Richard
el 28 de Sept. de 2023
Came here looking for the same issue with the browser version of Simscape Onramp.
Happy to confirm the workaround command worked, and I'm able to continue on!
Más respuestas (5)
Shubham
el 6 de Feb. de 2024
>> addpath(fullfile(matlabroot,'toolbox/physmod/sm/sli/m'))
0 comentarios
Ashwini
el 6 de Feb. de 2024
Error:Unrecognized function or variable 'simmechanics.sli.internal.register_datatypes'.
0 comentarios
Ashwini
el 6 de Feb. de 2024
Error:Unrecognized function or variable 'simmechanics.sli.internal.register_datatypes'.
0 comentarios
khalfallah
el 18 de Mzo. de 2024
Error:['SimscapeOnramp/Controlled Voltage Source', 'SimscapeOnramp/Electrical Reference', 'SimscapeOnramp/Gear Box', 'SimscapeOnramp/Ideal Rotational Motion Sensor', 'SimscapeOnramp/Inductor', 'SimscapeOnramp/Inertia', 'SimscapeOnramp/Mechanical Rotational Reference', 'SimscapeOnramp/Mechanical Rotational Reference1', 'SimscapeOnramp/PS-Simulink Converter', 'SimscapeOnramp/Resistor', 'SimscapeOnramp/Rotational Electromechanical Converter', 'SimscapeOnramp/Rotational Hard Stop', 'SimscapeOnramp/Simulink-PS Converter']: Each physical network must be connected to exactly one Solver Configuration block. There is no Solver Configuration block connected to Physical Network with the following blocks: 'SimscapeOnramp/Controlled Voltage Source'
'SimscapeOnramp/Electrical Reference'
'SimscapeOnramp/Gear Box'
'SimscapeOnramp/Ideal Rotational Motion Sensor'
'SimscapeOnramp/Inductor'
'SimscapeOnramp/Inertia'
'SimscapeOnramp/Mechanical Rotational Reference'
'SimscapeOnramp/Mechanical Rotational Reference1'
'SimscapeOnramp/PS-Simulink Converter'
'SimscapeOnramp/Resistor'
'SimscapeOnramp/Rotational Electromechanical Converter'
'SimscapeOnramp/Rotational Hard Stop'
'SimscapeOnramp/Simulink-PS Converter'
0 comentarios
Ver también
Categorías
Más información sobre Foundation and Custom Domains en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!