I need cost function for tuning PID controller help me
15 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I have to apply some algorithms for tuning PID controller parameters (Kp,Ki,Kd) so for any algorithm i have to get separate cost function file or called objective function so if anyone has p;ease send me the file thanks
0 comentarios
Respuestas (1)
Sam Chak
el 23 de Nov. de 2022
Editada: Sam Chak
el 25 de Dic. de 2022
Hi @Yazeed Ali
Not sure what your system is, but I think you can try the one of the simplest cost function probably looks like this:
Tuning the gains is probably simpler by manual calculations (follow formulas in textbooks) or with the pidtune() command.
function J = costfun(Kp, Ki, Kd)
[t, x] = ode45(@(t, x) myode(t, y), tspan, ic, opts);
error = x - x_ref;
J = trapz(t, error.^2); % ISE
% J = trapz(t, t.*abs(error)); % ITAE
end
function dxdt = myode(t, x)
% Insert your system and the PID controller
dxdt = A.*x + B*u;
end
Edit: An example is included.
Example: Consider the system described by
.
The cost function J is given by
where
and .
A full state-feedback controller is used:
The optimal feedback gain matrix is found using fmincon().
costfun = @objfun;
nvars = 2;
A = -eye(nvars);
b = zeros(nvars, 1);
Aeq = [];
beq = [];
lb = [0 0]; % lower bound
ub = [2 2]; % upper bound
k0 = [0.5, 1.5]; % initial guess
[k, fval, exitflag, output] = fmincon(costfun, k0, A, b, Aeq, beq, lb, ub)
function J = objfun(k)
tspan = linspace(0, 30, 3001);
ic = [1 0];
[t, x] = ode45(@(t, x) myode(t, x, k), tspan, ic);
Q = eye(2);
R = 1;
ifcn = Q(1,1)*x(:,1).^2 + Q(2,2)*x(:,2).^2 + R*(- k(1)*x(:,1) - k(2)*x(:,2)).^2;
J = trapz(t, ifcn); % ISE
end
function dxdt = myode(t, x, k)
dxdt = zeros(2, 1);
% my controller
u = - k(1)*x(1) - k(2)*x(2);
% my system
dxdt(1) = x(2);
dxdt(2) = - x(2) + u;
end
9 comentarios
Sam Chak
el 27 de Dic. de 2022
Editada: Sam Chak
el 27 de Dic. de 2022
I'm familiar with Grey Wolf. Why not consider posting the GWO code and the error message in a new Question? GWO was published by Seyedali Mirjalili in 2014. Optimization experts in MATLAB would be able to advise you.
I'm not sure if the proposed Cost function is helpful or not. Most likely it is because you cannot test with the GWO. However, it works with other optimizers such GA, PSO, ABC, etc., then we can safely assure that the proposed "Cost Function template" maybe effective.
I only verified it using fmincon. It does not guarantee to work with other optimizers. Let me know it doesn't work because I may consider removing it as I don't want other users to be misguided by the 'flawed' Cost Function. Thanks!
Ver también
Categorías
Más información sobre Linear Least Squares en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!