Borrar filtros
Borrar filtros

DTC-SVPWM for 4-phase SRM

6 visualizaciones (últimos 30 días)
Mohammed Amin
Mohammed Amin el 14 de Mayo de 2023
Comentada: Meznane Aymen Oussama el 12 de Mzo. de 2024
Hello,
I need help with my simulink simulation for DTC-SVPWM of 4-phase switched reluctance motor in order to finish my project of Master's degree. I am struggling and having difficulties in desingning the necessary blocks for of the SVPWM.
Can you help me to get the space vector pulse width modulation for the case of 4-phases, please ?
Thank you all
  1 comentario
Meznane Aymen Oussama
Meznane Aymen Oussama el 12 de Mzo. de 2024
hello amin can you give me simulation for DTC-SVPWM of 4-phase switched reluctance motor in order to finish my project you will help me a lot

Iniciar sesión para comentar.

Respuesta aceptada

Shaik
Shaik el 14 de Mayo de 2023
Hi Amin,
Certainly, I can provide some guidance on implementing space vector pulse width modulation (SVPWM) for a 4-phase switched reluctance motor in Simulink.
The first step is to define the reference signals for the SVPWM. For a 4-phase motor, you will need to generate four reference signals, one for each phase. The reference signals will represent the desired DC voltage level for each phase, which will be used to generate the pulse width modulated output signals.
Next, you will need to generate the switching signals for the inverter. You can generate the switching signals using the SVPWM algorithm, which involves calculating the duty cycles for each phase based on the reference signals and the position of the space vector.
In Simulink, you can use the "Space Vector PWM" block to implement the SVPWM algorithm. This block takes in the reference signals for each phase, as well as the electrical angle of the rotor, and outputs the PWM signals for each phase. You can connect the outputs of the "Space Vector PWM" block to the gate driver output blocks that control the inverter switches.
  1 comentario
Mohammed Amin
Mohammed Amin el 14 de Mayo de 2023
Hi Shaik,
Thank you for answering my question. Well, for more understanding, I am using PI controllers for both flux and torque (after estimating the flux and torque through alpha-beta voltages and currents generated from the converter ) where their outputs are going to be connected to the SVM block. Here i find a problem with the connections and the SVPMW block.

Iniciar sesión para comentar.

Más respuestas (0)

Productos


Versión

R2018a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by