Request for any relvalnt step-by-step video or tutorials for learning on green hydrogen production from wind power including modelling, simulation and optimization

My name is Kayes, and I am reaching out to express my keen interest on an innovative project focused on green hydrogen production from wind power and its integration with combined heat and power engines. I believe that your expertise in MATLAB/Simulink could be instrumental in bringing this project to life.

Here is a brief overview of the project model we aim to develop and optimize:

- Hydrogen production from wind power or grid power through an electrolyzer.

- Compression and storage of hydrogen in designated tanks.

- Mixing of hydrogen with natural gas.

- Utilization of the blended gas or pure hydrogen in combined heat and power (CHP) engines to generate heat and power.

As I am still in the learning phase of MATLAB/Simulink, I am eager to seek your guidance on how best to proceed with this project. Your insights and suggestions would be invaluable as I embark on this exciting journey.

If you could recommend any relevant step-by-step tutorials, videos, or resources that would help me enhance my understanding of MATLAB/Simulink in the context of this project, I would greatly appreciate it.

I am enthusiastic about the prospect of working together and leveraging our combined skills to create a robust model, conduct simulations, and optimize the system effectively. Your mentorship and expertise would undoubtedly contribute to the success of this endeavor.

Warm regards,

Kayes

Answer 1

[Simran]

Hi @Kayes Md Abu,

I see you’re looking for step-by-step tutorials or resources that could help you with your understanding of MATLAB and Simulink, that too specifically for a project centered on green hydrogen production from wind energy and its integration with combined heat and power engines.

Below are some MathWorks documentation and resources you can refer to:

1.) For MATLAB/Simulink basics:

MATLAB Onramp- https://matlabacademy.mathworks.com/details/matlab-onramp/gettingstarted

Simulink Onramp- https://matlabacademy.mathworks.com/details/simulink-onramp/simulink

2.) Documentation for Electrolyzer modeling: https://www.mathworks.com/help/sps/powersys/ref/electrolyzer.html

3.) Documentation for Hydrogen Compression and Storage: https://www.mathworks.com/help/simscape/ug/modeling-gas-systems.html?searchHighlight=Simscape+Gas+&s_tid=srchtitle_support_results_1_Simscape+Gas+

4.) Documentation on Simscape Power System Library: https://www.mathworks.com/support/search.html/videos/modeling-electrical-power-systems-in-simscape-electrical-1675265945014.html?selectedsource=mw&fq%5B%5D=asset_type_name:video&fq%5B%5D=category:simulink/index&page=1

5.) Once your models are built, you can use MATLAB to optimize system parameters using the following documentation:

https://www.mathworks.com/products/optimization.html

[John D'Errico]

Good response. A little late for the OP to gain from it. But better late than never!