Obtain Transfer Function for Bode Plot data from PLECS Software

I have some bode plot data in an excel sheet which contains following columns.

Frequency / Hz Am1:Measured current Am1:Measured current

I have a range of values under each of this columns, I am interested in finding the transfer function that can generate similar bode plot.

Is this possible? If yes, how can I achieve it using MATLAB?

Attaching the CSV and the original bode plot here. Bode plot was generated using PLECS software.

Answer 1

[Mathieu NOE]

hello

If you have the signal processing toolbox, you can use invfreqs or invfreqz to identify a transfer function

here I used invfreqs to generate a continuous time model (transfer function) , that I then converted to dicrete model (fyi)

you can try to adapt the numerator and denominator order to find the best match (with minimal order)

NB that your data are a bit coarse , frequency resolution is not great , especially to have a good estimate of the poles damping / frequency

data = readmatrix('plecsbode_og.csv');

freq = data(:,1);
mod_dB =  data(:,2);
phas_deg = data(:,3);

Mag = 10.^(mod_dB/20); % convert dB to linear magnitude
Response = Mag.*exp(1j*pi/180*phas_deg);    % Complex Vector

Ts = 0.5/(2*(max(freq)));
Fs = 1/Ts;

% TF  design
NA = 6;
NB = NA-2; 
W = 2*pi*freq;
[num,den] = invfreqs(Response,W,NB,NA,[],100);
hverif = freqs(num,den,W);
% convert to SS
[A,B,C,D]=tf2ss(num,den);
[Ad,Bd,Cd,Dd] = c2dm(A,B,C,D,Ts,'matched');
SYS = ss(Ad,Bd,Cd,Dd,Ts);
[M,P] = bode(SYS,W);
 
M = squeeze(M);
P = squeeze(P);
P = wrapTo180(P);

figure(1)
subplot(2,1,1),semilogx(freq,20*log10(Mag),'b',freq,20*log10(abs(hverif)),'r',freq,20*log10(M),'c');
legend('data','TF ','SS '); 
xlabel('Frequency (Hz)');
ylabel('modulus (dB)');
subplot(2,1,2),semilogx(freq,wrapTo180(phas_deg),'b',freq,180/pi*(angle(hverif)),'r',freq,(P),'c');
legend('data','TF ','SS '); 
xlabel('Frequency (Hz)');
ylabel('modulus (dB)');

[Mathieu NOE]

hello again

probelm solved ?