USRP X310 Validate Radio Setup Error

I used 'Wireless testbench Support package for NI USRP Radios' for configuring my NI USRP-2954R, and I met the following error in the validate tap.

How can I solve this problem?

Answer 1

[Saurav]

Hello @민석

I see that you are using the NI USRP-2954R as your hardware device. The USRP X310 radio support allows users to use equivalent USRP NI–2954R radios with the Wireless Testbench. However, it needs to be converted into an equivalent X310 radio before use.

For more information on how to perform this conversion, refer to the following guide:

https://kb.ettus.com/Running_UHD_and_GNU_Radio_on_NI_USRP-RIO

To learn more about supported USRP devices in MATLAB R2023b, refer to this link:

https://www.mathworks.com/help/releases/R2023b/wireless-testbench/gs/supported-sdr-devices.html

If the hardware has already been configured and you are still encountering the error, follow the documentation in the following order to properly set up the NI USRP Radio:

1. Guided USRP Radio Support Package Hardware Setup:

https://www.mathworks.com/help/comm/usrpradio/ug/guided-support-package-hardware-setup.html

2. Resolve Issues with Connecting Radio to Host:

https://www.mathworks.com/help/wireless-testbench/ug/resolve-issues-with-connecting-radio-to-host.html

3.Resolve Issues with Radio Setup Validation:

https://www.mathworks.com/help/wireless-testbench/ug/resolve-issues-with-radio-connection-validation.html

Hope it helps.