Is it possible to start a Simulink-Model on Raspberry Pi automatically after power is supplied to the hardware?

Is it possible to start a Simulink-Model on Raspberry Pi automatically after power is supplied to the hardware?

I use Matlab&Simulink R2015b and Raspberry Pi 2 Model B!

Many thanks in advance!

[Ahmed Desoky]

Did you solve this problem?

Answer 1

[Madhu Govindarajan]

The Raspberry pi support package creates an executable that gets downloaded to the hardware. If you know the equivalent of running scripts on start-up for Raspberry Pi (which I am not aware of) you should be able to call this executable in a script and run it.

Answer 2

[Prasanth Sunkara]

It is possible to configure a model to always start when the raspberry pi boots up.

If you have a MATLAB code deployed to raspberry pi , please refer to the below link.

https://www.mathworks.com/help/supportpkg/raspberrypiio/ug/run-matlab-function-on-reboot.html

If you have a Simulink Model deployed to raspberry pi , please refer to the below link.

https://www.mathworks.com/help/supportpkg/raspberrypi/ug/run-simulink-model-on-reboot.html

-Prasanth