How to transmit parameters to PID controller in simulink
2 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Renata Pan
el 22 de Sept. de 2015
Editada: Renata Pan
el 24 de Sept. de 2015
My PID parameter value Kp, Ki, Kd has to be calculated through other port in my simulink graph, but I don't know how to achieve this.
I saw this picture in Mathworks:
And I think it may work, but I don't know how to set the PID controller in libraries becomes like this. Thank you for taking time to read my question.
0 comentarios
Respuesta aceptada
Sebastian Castro
el 22 de Sept. de 2015
Configuring the PID Controller block in this way is new to R2015a, so if you have an earlier version you won't be able to do this. If you are on R2015a or R2015b, there should be a "Source" menu in the block dialog which you can change to external.
If you're on an earlier version, you can still implement this yourself. Right-click the PID Controller block and select "Mask > Look Under Mask". This will show you how the block is implemented, so you can replicate that diagram and replace all the Gain blocks with Product blocks, one of the inputs being a port to an external output.
- Sebastian
1 comentario
Más respuestas (0)
Ver también
Categorías
Más información sobre PID Controller Tuning en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!