How can I position the side of a port in simevents

In earlier SimEvents Versions (e.g. Matlab R2012) it was possible to position SimEvents Ports on the left or right side of a Subsystem. In R2017a this seems to be not possible, since there are no more special SimEvents Ports, but only the normal IN/OUT Ports. Is there still the possibility to position the Ports of a Subsystem for SimEvents?

Answer 1

[Teresa Hubscher-Younger]

Hi Lucas,

We decided to make SimEvents more consistent with Simulink and use normal In and Out ports.

Like with Simulink, to position inputs to different sides of the subsystem, you have rotate or flip the block by right-clicking on it and choosing "Rotate & Flip" and then choosing the position you want.

This, though, will keep all inputs and outputs together. I'm not sure if you wanted to move inputs and outputs to different sides from each other. Let me know if that's the case.

-Teresa

[Lucas]

Hello Teresa,

Thanks for your answer. What I want to do is to change the position on the subsystem block, so that an input can also be on the right side and an output on the left side. Not in the Subsystem itself, but on its mask. This was possible with the old SimEvents blocks. It's not possible with the newer SimEvents, isn't it?

Thanks in advance!

Lucas