Measurement Computing DAQ: USB-1608FS-PLUS not recognized.
10 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I have the latest version of Matlab 2017a (9.2) installed with
- Data Acquisition Toolbox version 3.11
- Data Acquisition Toolbox Support Package for Measurement Computing Hardware version 17.1.0
- Data Acquisition Toolbox Support Package for National Instruments NI-DAQmx Devices
According to the documentation for the Support Package for Measurement Computing , it is supposed to support the USB-1608FS-PLUS DAQ. But Matlab doesn't seem find the DAQ. I'm sure that I have the packages installed correctly.
>> daq.getVendors()
ans =
Number of vendors: 2
index ID Operational Comment
----- --- ----------- ---------------------------
1 ni true National Instruments
2 mcc true Measurement Computing Corp.
I've been using National Instruments USB-6008 Data Acquisition DAQ with no trouble.
When using the DAQami software from MCC - I find the USB-1608FS-PLUS DAQ and am able to acquire the signal as expected.
I would really want to use Matlab for acquiring the data. Can anyone help me on this?
0 comentarios
Respuestas (4)
Tushar Upadhyay
el 1 de Mayo de 2017
Please execute the below commands:
>> daq.getDevices
The above command should list the MCC device.
If it does not get detected in the above command, then for your Measurement Computing device to appear in the output of the daq.getDevices function, you must first detect it in InstaCal. If it appears in InstaCal and still not in the MATLAB, then please provide InstaCal version and output of the below command:
>>daqsupport
2 comentarios
Priya
el 2 de Jul. de 2024
Hello I am facing the same issue regarding not being able to recognise the USB DAQ. I am
Priya
el 2 de Jul. de 2024
I am trying to connect USB-1208FS-Plus. & It is being recognised by the driver (version:InstaCal 6.74) but not the matlab toolbox. Please help.
Morteza Mohammadjavadi
el 1 de Dic. de 2017
Editada: Morteza Mohammadjavadi
el 1 de Dic. de 2017
Hi,
I have the same problem, have you found any solution? I am using: MATLAB version: 9.3(R2017b)
Name: 'Data Acquisition Toolbox' Version: '3.12' MCC, USB-1208FS-Plus
1 comentario
M. Tarik Copoglu
el 9 de En. de 2018
Editada: Walter Roberson
el 10 de En. de 2018
Hi there,
I have the same device(MCC, USB-1208FS-Plus) and the same MATLAB version(R2017b) you use. I am having the same problem as you had. I wonder if you found a solution for that. If you did, can you share it with me please? Thank you!!!
Konrad Fründ
el 14 de Jul. de 2021
I found out, that I am stuck in a busy loop, if I am not connecting right after plugging in the device, while the light is still turned on.
0 comentarios
Ver también
Categorías
Más información sobre Analog Input and Output en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!