Simulink Reference Signal tracking

Hello everyone,

-I have a Simulink model (with both normal simulink blocks and SimScape blocks).

-I want to simulate an electromechanical actuator with an aileron. My model is working well but I want that the aileron position matches the reference position signal, which is a sine wave (Amplitude=50; Bias=0; Frequency(rad/sec)=0.5; Phase=0).

-I would like to know if it's possible to use "Analysis->Response Optimization" tool with my sine signal (and if possible how?).

-I know this tool is normaly used for PID signals (which normaly have an amplitude of 1), but I dont know if it's possible to use this tool with my sign signal that has an amplitude of 50. Also when I use the "Signal Tracking" option I don't know which values I need to put in "Time Vector" and "Amplitude" for this sine wave.

-)Is it possible to do what I ask?

-)If no, there is an other way or tool that can make that the output plant signal matches with the reference signal?

Many thanks!!