Image Acquisition Toolbox / TurboDrive

I would like to know how to increase acquiring images in the Image Acquisition Toolbox . my camera (Dalsa Genie Nano M2590) that I am using has a TurboDrive property (it enables camera to transmit image information at a rate exceeding the constraints of gigabit Ethernet) , I would like to activate this GenICam feature in Matlab ( in order to get more frames per second ) , currently i am achieving 40 fps and i need to come to 60 fps .

Answer 1

[Han Du]

Looking at the Teledyne DALSA FAQ about TurboDrive:

http://info.teledynedalsa.com/acton/attachment/14932/f-04e2/1/-/-/-/-/TurboDrive%2520FAQ.pdf

last item, you should be able to enable this in their CamExpert tool and then it should be transparently enabled in any imaging application. I have to say though that they are not very clear on whether it is really available to any imaging application then or only applications which in the past had already specifically been designed to work with their SDK and/or their specific "GigE Vision driver". While we do have a Teledyne DALSA specific adaptor which specifically works with their SDK, this is only supported for some of their framegrabbers:

https://www.mathworks.com/hardware-support/teledyne-dalsa.html

The GigE cameras are typically supported through the more generic GigE adaptor. So, I am not sure whether this will actually work or not. You may want to double check with Teledyne DALSA on the exact requirements for this feature to work.